AMK Products Master Body Kit Bronco 1973-1977

AMK Products:
73B-M
Rating:
100% of 100

Highlights

  • 315 Piece Kit
  • Individually Packaged Bolts
  • Factory Correct Bolts
  • Easy Installation
MSRP $240.00
$221.34
You save 8%

AMK Products Master Body Kit for 1973, 1974, 1975, 1976 and 1977 Broncos.

If you are looking to do a full restoration on a classic 1973-1977 Bronco, chances are you are going to need pretty much every piece of hardware for reassembly. This Master Body Kit from AMK Products contains 315 pieces of OEM quality, factory-correct hardware to put your 1973-1977 Bronco back together.

Features and Benefits:
- Factory-Correct Coatings and Finishes
- All Required Hardware
- Durable Materials
- Sold As a Complete Kit

This Master Body Kit was created using AMK Products individually packaged sets of hardware for various parts of the 1973-1977 Bronco. Each bag of hardware is labeled for easy identification as to what that specific hardware is used for.

In most cases, depending on the body part, AMK Products provides the proper amount of hardware for both driver and passenger sides of the Bronco. Most of the hardware pieces are finished in a factory-correct black phosphate coating. Where necessary, other pieces may have different finishes.

With a Master Body Kit from AMK Products, you will not only save time and money, but you will have the confidence knowing your 1973-1977 Bronco is going to be assembled with the finest hardware available.

This Kit Includes:
- Battery Tray: Flange Bolts, U-Nuts (4)
- Bed Corners - Hole Cover Plates: Type AB Phillips Pan Head Sheet Metal Screws (2)
- Front and Rear Bumpers: Stainless Steel Capped Bolts, Washers, and Nuts (32)
- Door Hinges: Hex Screw/Conical Spring Washer Assemblies (24)
- Door Latch Strikers: Pozidrive Flat Head Screws (4)
- Door Latches to Door Shells: Phillips Flat Head Screw/External Tooth Washer Assemblies (6)
- Door Stop Straps: Phillips Pan Head Screws (8)
- Exterior Door Handles: Phillips Pan Head Screw/External Tooth Washer Assemblies, Nut/External Washer Assemblies (4)
- Exterior Mirror to Door: Stainless Steel/Chrome Pozidrive Oval Head Screws, Rivet Nuts (4)
- Fender to Apron Brackets: Hex Screw/Conical Spring Washer Assemblies, U-Nuts (6)
- Fenders: Hex Screw/Conical Spring Washer Assemblies, Pozidrive Screw/External Tooth Washer Assemblies, U-Nuts, Cage Nuts (42)
- Grille: Hex Screw/Conical Spring Washer Assemblies, J-Nuts, U-Nuts (26)
- Headlamp Adjusters: Adjusters, and Springs (6)
- Headlamp Doors: Stainless Steel/Chrome Phillips Pan Head Screws, and Spring Nuts (18)
- Headlight Splash Shields: Nylon Retainers (4)
- Hood: Hex Screw/Conical Spring Washer Assemblies (4)
- Hood Latch: Hex Screw/Conical Spring Washer Assemblies, U-Nuts (8)
- Hood Latch Auxiliary Catch: Hex Screw/Conical Spring Washer Assemblies, U-Nuts (4)
- Hood Levelers: Rubber Bumpers, and Nuts (6)
- Hood Prop Rod: Cotter Pin, Flat Washers (3)
- Jack Clamp to Fender Apron: Hex Bolts, Wing Nuts, Hex Nuts, Flat Washers (13)
- Liftgate Center Latch: Pozidrive Oval Head Screw/External Tooth Washer Assemblies, Pozidrive Pan Head Screw/Conical Spring Washer Assemblies(9)
- Liftgate Latch Strikers: Pozidrive Oval Head Screw/External Tooth Washer Assemblies (4)
- Rear License Plate Support: Type 1 Hex Washer Head Machine Screws (6)
- Tailgate Latches: Hex Screw/Conical Spring Washer Assemblies (4)
- Tailgate Release Handle Bezel: Pozidrive Oval Head Screw/External Tooth Washer Assemblies, Hex Screw/Conical Spring Washer Assemblies(10)
- Tailgate Support Arms: Hex Screw/Conical Spring Washer Assemblies (4)
- Tailgate Support Bumpers: Type A Phillips Pan Head Sheet Metal Screws (2)
- Parking Lamp Lenses: Stainless Steel/Chrome Phillips Pan Head Shoulder Screws (4)
- Parking Lamps: Stamped Nuts (4)
- Reflectors Front and Rear: Stainless Steel Phillips Pan Head Screws, and Nylon Nuts (16)
- Taillight Lenses and Doors: Stainless Steel Phillips Screws, Spring Nuts (8)
- Taillight Body: Phillips Pan Head Screws (4)
- Tailgate Support: Hex Bolts, and Fiber Spacer Washers (8)
- Tailgate Strikers: Pozidrive Flat Screws (4)

California Residents: Proposition 65 Warning

Installation Videos

Video Transcript

We’re here with an AMK Master Body Hardware Kit fitting your 1973 through 1977 Bronco. If you're restoring your '73 through '77 Bronco, one of these Master Body Kits from AMK is a must-have. This is going to be all the correct hardware to reassemble the body on your '73 through '77, and it's the correct style OEM hardware. This 315 piece kit is going to cover fenders, doors, basically any piece of the body you need to assemble. Check out our website for detailed listing of everything included in our Master Hardware Kit. This hardware kit is made in the USA. It is OEM quality, designed specifically for your '73 through '77 Bronco.

Vehicle Fitment

This product will fit the following Bronco years:

Only registered users can ask/answer questions. Please sign in or create an account.
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account