AMK Products Underhood Detailing Kit Shelby 1967

This Underhood Detailing Kit from AMK Products includes 218 total pieces of original style, factory correct fasteners that are intended to improve the overall underhood appearance of your assembled 1967 Shelby GT350 or GT500 in one convenient kit! If your newly restored 1967 Shelby is suffering from incorrect or unsightly mounting hardware under the hood, this kit is a must have for that final touch.

AMK Products' Underhood Detailing Kit includes individually packaged sets of hardware for numerous parts under the hood of your 1967 Shelby. Each package of hardware is thoroughly labeled so you know exactly where it goes on your Mustang. The individual sets of hardware also include the total number of pieces that are required for the specific application. This kit will work on all 1967 Shelby GT350s and GT500s.

Underhood Detailing Kit Includes:
- Battery Hold Down Clamp: J-Hooks, Hex Washer Head Sheet Metal Screw, Nut/Conical Spring Washer Assembly (5)
- Fender Tops Only "SEMS": Hex Screw/Conical Washer Assembly (12)
- Front Shocks (Top Mount Only): Hex Screw/External Tooth Washer Assembly "SEMS" (4)
- Front Shock Brackets: Lower Heavy Duty Carriage Bolts, Flange Nuts (12)
- Heater Assembly to Firewall: Stamped Nuts with Integral Sealer (4)
- Hood and Hinges: Hex Screw and Conical Spring/Conical Washer Assembly, J-Nuts (14)
- Hood Latch and Catch: Hex Screw/Conical Washer Assembly, J-Nuts (5)
- Hood Latch Support: Hex Screw/Conical Washer Assembly (3)
- Horns: Hex Screw/Conical Washer Assembly, Serrated Flange Nuts (4)
- Radiator Fan Shroud: Hex Washer Head Sheet Metal Screws, Spring Nuts (8)
- Radio Hood Ground: Hex Washer Head Sheet Metal Screw (1)
- Shelby Export Brace to Cowl: Hex Bolts, Flange Nuts, Flat Washers (12)
- Shelby Grilles (Car # 200 and Up): Hex Screw/Conical Washer Assembly, J-Nuts, Black Rivets (10)
- Shelby Grille Emblem: Correct Sleeve Nuts (4)
- Shelby Headlight Buckets (Car # 200-1000): Phillips Truss Head Sheet Metal Screws (12)
- Shelby Headlight Buckets (Car # 1001 and Up): Slot Truss Head Threaded/Hex Washer Head Screws, Nuts (24)
- Shelby Headlight Doors: Chrome #6 Phillips Oval Head Sheet Metal Screws (12)
- Shelby Junction Block at Passenger Side Apron: Hex Washer Head Sheet Metal Screws (2)
- Shelby Nose Panel: Special Black Blind Rivets, Serrated Nuts (15)
- Shelby Power Steering Oil Cooler: Hex Washer Head Sheet Metal Screws (2)
- Shelby Vehicle ID Plate: Black Blind Rivets (2)
- Shock Tower Braces: Hex Screw/Conical Washer Assembly, Serrated Flange Nuts (24)
- Starter Solenoid: Hex Washer Head Sheet Metal Screws "D" (2)
- Voltage Regulator: Hex Washer Head Sheet Metal Screws "Diamond", External Washer (3)
- Washer Nozzles and Tee: Hex Washer Head Sheet Metal Screws (3)
- Windshield Washer Bottle: Hex Washer Head Sheet Metal Screws (3)
- Wiring in Engine Bay: 3-1/8" Nylon Straps (11)
- Wiring at Firewall: 4" Nylon Straps (1 for Washer Hose) (3)
- Wiring to Passenger Side Apron Below Relay: D-Shaped Nylon Retainers (2)

Buying individual sets of hardware for under the hood of your 1967 Shelby can be expensive and time consuming if you're not sure which hardware you need. This Underhood Detailing Kit makes it easy by including factory correct fasteners that specifically fit your 1967 Shelby GT350 or GT500. With an Underhood Detailing Kit from AMK Products, you will not only save time and money, but you will have the confidence knowing that the parts under the hood of your 1967 Shelby will be fastened or assembled with the most accurate hardware on the market!

AMK Products produces the most factory correct hardware for your classic Mustang. No matter what kind of Mustang you're building, there's no company better for nuts and bolts than AMK Products!