Baer Brakes Extreme+ Front Brake System with Silver Calipers 6-Lug Chevy C10 1960-1987

With this front brake system, cruising your 1960-1987 Chevy C10 on the streets will feel better than ever (4301391S). Tailored to 6 X 5.5 bolt patterns, this system contains 6S Monoblock calipers made from 2618 forged aluminum. They use six pistons, each built in staggered sizes from stainless steel to reduce wear over time. For excellent heat regulation, its 14” drilled and slotted rotors are then built into a two-piece design. Though if you decide to use other rotors, the calipers can accept anywhere between a 13-1/2” to 16” diameter.

Features and Benefits:
- 6S Monoblock Calipers Made of 2618 Forged Aluminum
- Six Stainless Steel Pistons
- Pistons Have Staggered Size for Less Wear
- Caliper Accepts 13-1/2” to 16” Rotors
- Silver Powder Coat on Calipers
- Noise Suppression Springs for Quiet Ride Quality
- 14” Two-Piece, Drilled & Slotted Rotors
- Rotors are Zinc-Plated
- 6061 T-6 Aluminum Hats Bolted onto Rotors
- Common Race Pad Backing Plate
- Dust & Weather Seals are DOT-Compliant
- Stainless Steel Brake Hoses
- Correct, Banjo-Style Fittings
- Includes Set of 6061 T-6 Aluminum Hubs
- Hubs Pre-Assembled with Hardware & Synthetic Grease

From a lustrous, silver finish on the calipers to clean, zinc-plating on the rotors, this system makes for a stylish look. DOT-compliant seals help it last years to come, blocking dust and other outside elements from making their way inside. It’s quiet as well thanks to its noise suppression springs. Stainless steel brake hoses, correct banjo-style fittings, and a set of 6061 T-6 aluminum hubs complete the system. Since the hubs are pre-assembled, they come with bearings, studs, and are packed with Redline synthetic grease.

Vehicle Fitment:
- 1960-1987 Chevy C10
- For 6 X 5.5 bolt patterns
- ONLY for models with Classic Performance Products 2” Drop Spindles
* MUST have minimum tire size of 18”
* Also fits SUV models

Please Note: If your vehicle does not have 2” drop spindles from Classic Performance Products, please see the following part numbers for spindles that will suit your application. CP30106-1 is for 1960-1962 models, CP30106-2 is for 1963-1970 models, CP30106-3 is for 1971-1972 models, and CP30106-4 is for 1973-1987 models.