BBK Cold Air Intake Fenderwell Chrome Kit 5.0L 1994-1995

  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getAggregateRating, 108.9ms
  • bvseo-msg: HTTP status code of 404 was returned;


  • Made In The USA!
  • 50-State Legal
  • Bolt On Installation
  • Chrome Plated Finish
MSRP $259.99
You save 15%

BBK Chrome Fenderwell Cold Air Intake Kit for 1994-1995 Mustangs with a 5.0L Engine.

Are you looking to add a performance Cold Air Intake on your 1994-1995 Mustang? If so you might be interested in this Chrome Fenderwell Cold Air Intake Kit from BBK. This BBK Chrome Fenderwell Cold Air Intake Kit is a performance upgrade for all 1994-1995 Mustangs with a 5.0L Engine. When you install this Cold Air Intake Kit you will see significant Horsepower and Torque gains.

- Produces Cooler and Denser Air Flow
- Provides Improvement in Horsepower, Throttle Response and Torque
- Bright Chrome Plated Tubing Finish
- Lightweight Aluminum Inlet Casting
- Includes a Reusable Conical Cotton Element Filter
- Bolt-On Installation
- 50 State Smog Legal
- Made in the USA

This BBK Fenderwell Cold Air Intake Kit utilizes a chrome plated intake with a lightweight aluminum inlet casting that is also chrome plated. The Chrome Plated Finish provides a mirror like finish that will really change the appearance under the hood of your Mustang. BBK also designs this kit to use a high-flow conical cotton element filter that comes pre-oiled and can be reused. When you install this Cold Air Intake Kit you will experience cleaner and dense air flow for more horsepower.

Upgrading your Mustang for better performance and handling is a challenge, as most every Mustang owner wants to install the best possible parts that are available for the least cost. With parts from BBK Performance, you'll get superior quality products that are available at a very reasonable cost. CJ Pony Parts offers hundreds of parts from BBK Performance available for your Mustang upgrade today!

Order a new BBK Chrome Fenderwell Cold Air Intake Kit for 1994-1995 Mustang with a 5.0L Engine from CJ Pony Parts today!

California Residents: Proposition 65 Warning

This item is 50-state legal (CARB E.O. Number D-245-14)

Installation Difficulty


Intermediate skill is required for this installation.

Installation Videos

Video Transcript

We're here with a Fenderwell mount cold air kit for your 1994 through 1995 5-liter Mustang from BBK. The cold air kit features chrome plated tubing, silicone couplers, a chrome plated plate that actually goes on the Fenderwell, where the cold air kit goes out to the fender, all necessary amounting of hardware, as well as a reuseable filter. Our BBK Fenderwell mount cold air kit is an excellent way to dress up the under hood of your car while adding a little bit of extra horsepower.

Vehicle Fitment

This product will fit the following Mustang years:

  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getReviews, 4.56ms
  • bvseo-msg: HTTP status code of 404 was returned;

do i need to change anything on the car to run this cold air set up???

Asked by: Ditzler
You shouldn't have to, please check out the installation instructions here:
Answered by: CJPP Dave
Date published: 2018-02-19

Instead of blue, would it be possible to get the silicon couplers in yellow? Or would I have to go to bbk directly? Thanks! 

Asked by: 19mustanGT9450
They are only offered in blue.
Answered by: rk cjpp
Date published: 2017-07-17

Is it possible to change the 3 blue rubber outlets or inserts because mine are very dirty and even though I have tried to clean them, they are still dirty and grey.

Asked by: alainduf94
BBK may offer those individually, but, unfortunately, we do not.
Answered by: CJ Pony Parts
Date published: 2015-08-04
  • y_2020, m_7, d_7, h_15CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.10
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_3
  • loc_en_US, sid_CAK11, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getContent, 157.12ms