Classic Instruments 6-Gauge Set Gray Auto Cross Series With 4-5/8" Speedo/ Tach And 2-5/8" Gauges For 0-90 OHM Fuel Sending Unit

If you're looking to add some unique vintage styling to your truck's interior that will get you noticed in the showroom and by your passengers, check out this Classic Instruments (AX251GBLF-GM) Gray Auto Cross Series 6 Gauge Set now available at CJ Pony Parts. With a complete replacement set of gauges that look vintage but perform to modern standards, you'll get the best of both worlds.

Features and Benefits
- 4-5/8" 200 MPH Speedometer
- 4-5/8" 10000 RPM Tachometer
- 2-5/8" Fuel Gauge 0-90 OHM
- 2-5/8" Oil Pressure
- 2-5/8" Water Temperature
- 2-5/8" Volts
- Perimeter Incandescent Lighting
- Black and Gray Faces with White Script and Pool Cue Needles
- Matte Black Low Step Bezels with Flat Glass Lenses
- Classic Styling with Modern Performance
- Includes Detailed Instructions and Mounting Hardware

This set includes both a 4-5/8" speedometer and a 4-5/8" tachometer, along with four 2-5/8" gauges for fuel level, oil pressure, water temperature and volts. The speedometer reads at 200 MPH and the tachometer ends at 10,000 RPM. Both of these larger gauges feature etched diffuser rings while the other gauges have "eyelids" with their respective ISO symbols. All of the gauges, with the exception of the tach gauge, have black faces with white script and white pool cue needles. The tach gauge has a medium gray face with white and red script and a red-tipped pool cue needle. To make it easier in shifting operation, the tachometer also features a bright red shift indicator light.

Classic Instruments includes step-by-step instructions for installing these gauges. All the mounting hardware, including the U-bracket, is included, as are the necessary sending units. The notable exception is that the fuel sending unit is not included. These gauges will work with the stock 0-90 OHM fuel sender.

Vehicle Fitment:
- 1960-1987 Chevrolet C10

Please Note: 1964 and earlier trucks utilize a 0-30 OHM fuel sending unit, and will require a 0-90 OHM unit to work with this fuel gauge.