Classic Performance Products Power Front Disc Brake Conversion Manual Transmission Mustang 1967

Drum brakes are dangerous, heavy, and outdated. If you want a more comfortable and responsive braking system, discs are the answer! This CPP Power Front Disc Brake Conversion adds the luxury of disc brakes and power assistance to your classic Mustang.

Features and Benefits:
- Four piston calipers offer great performance
- Complete disc brake conversion
- Includes master cylinder
- Fits OE V8 spindles

This kit includes everything needed to swap out your front drum brakes for the Kelsey-Hayes 4 piston calipers originally found on 1967 V8 Mustangs. This is the kit is designed to fit with original wheels for a factory-stock look!

This Kit Includes:
- Dust shield kit
- Caliper brackets
- Corrosion protected calipers
- Brake pads
- Brake hoses
- Hose brackets and attachment hardware
- Adjustable proportioning valve
- Residual pressure valve
- Master cylinder
- Master cylinder outlet adapter(s)
- An adjustable pushrod
- Wheel bearings
- Wheel seals
- Caliper attachment hardware
- Wheel attachment hardware
- Dust caps
- Performance slotted rotors with bearing races pre-installed
- Grade 8 attachment bolts

Please Note: You will need to adapt or re-fab your hard brake lines to accommodate the proportioning valve, the residual pressure valve, and the master cylinder.

Tech Tip: Most original V8 14" wheels will fit this conversion.