COBB Exhaust Hanger Polyurethane Kit Focus ST 2013-2018

COBB:

591001

COBB Exhaust Hanger Polyurethane Kit Focus ST 2013-2018 is rated 4.9 out of 5 by 68.

Highlights

Polyurethane Construction
Complete Kit
Easy Installation
Performance Upgrade

$55.00

Skip to the end of the images gallery

Skip to the beginning of the images gallery

Product Description

COBB Polyurethane Exhaust Hanger Kit for all 2013, 2014, 2015, 2016, 2017 and 2018 Focus STs.

Have you installed an aftermarket exhaust but kept the stock mounting hardware and have seen and heard less than desirable results? If so, then these new exhaust hangers from COBB are just what you need to pick up!

These polyurethane hangers are much more rigid and sturdy than the factory rubber hangers found stock on the 2013-2018 Focus ST. This helps reduce excessive exhaust movement that can lead to the occasional rattle or rubbing that troubles so many drivers.These highly durable urethane exhaust hangers are an exact replacement for the factory units.

Kit Includes
- Polyurethane Construction
- Reduced Exhaust Movement
- Quickly Installs
- 1 Twist In Hanger
- 3 Two Hole Conventional Hangers

*The COBB Polyurethane Exhaust Hanger Kit will NOT work with the 2016-2018 Focus RS.

This kit will prove worthy if your exhaust system occasionally knocks against the subframe or exhaust tunnel during aggressive driving. So whether you are taking a leisurely drive or really getting on it and pushing your Focus ST to the max, this Polyurethane Exhaust Hanger Kit from COBB will keep your exhaust securely in place and immobilized.

Order this COBB Polyurethane Exhaust Hanger Kit for your 2013, 2014, 2015, 2016, 2017 or 2018 Focus ST from CJ Pony Parts today!

California Residents: Proposition 65 Warning

Installation & Fitment

Installation Videos

Vehicle Fitment

This product will fit the following Focus years:

Reviews

Rated 5 out of 5 by ShaunZ28 from Great fit just what I needed. I have a 2017 Ford Focus ST and I bought the Borla Cat Back exhaust. It needs four exhaust hangers, however the stock exhaust only has three. The missing one is the hanger just over the rear suspension. The stock exhaust does not need this hanger as the exhaust is all one piece, however when you bolt in the pieces of the Borla or any after market exhaust you will need this hanger for over the rear suspension. With out it there will be too much play in the system and the exhaust tips will tip up and rub again the bumper. Definitely a must if you are buying an exhaust system for at 2017 Ford Focus. I hear though that Focus ST's 2013-15 have this fourth hanger already, so you would not need this for the older Focus.

Date published: 2018-02-28

Rated 5 out of 5 by Jjohnson1828 from Excellent Ended up buying these since the stock exhaust hangers decided to try to split apart before removal of the exhaust. I went with the mbrp exhaust had absolutely no issues these hangers are very strong and definitly worth buying. The 4th hanger was a tight fit with the 3” exhaust but it goes on. Also had to modify the hanger rod on my exhaust to fit through the twist in hanger due to how stiff they are but once it was done the exhaust doesn’t move at all. They seem a bit overpriced but they are worth it. Stock hangers only have 3 and are definitly cheap compared to these.

Date published: 2018-04-08

Rated 5 out of 5 by Ricky from A must need for aftermarket exhaust I used these hangers for my tubroback exhaust from cobb and they are a perfect fit. The OEM hangers have so much flex in them and are extremely soft which would undoubtedly get unwanted movement. These hangers from cobb also do not add any additional vibrations or noise.

Date published: 2016-02-28

Rated 5 out of 5 by lolcoolj from A must-have for any aftermarket exhaust Bought these to go with my Roush cat-back exhaust and there is absolutely zero rattle.

Date published: 2016-10-07

Rated 5 out of 5 by whirledpeaz from Works as advertised I recently added an aftermarket catback exhaust to my 2014 Focus ST. I was not happy with the amount of movement the oem hangers allowed. I found out about these hangers and decided to try them. They were easy to install and allow almost no lateral movement of the exhaust. A "must-have"!!

Date published: 2014-07-27

Rated 5 out of 5 by John from Must have item! I had installed an aftermarket exhaust with large tips. With the stock hangars there was too much movement and the tips were hitting the bodywork. These hangars totally eliminated the flex in the exhaust. There was no noticeable increase in noise or vibration. Excellent product.

Date published: 2015-10-03

Rated 4 out of 5 by Con707904 from Yay cobb Bought this for my 2016 focus ST. Installed a mbrp exhaust along with these hangers. The hangers are definitely more rigid, and better quality. HOWEVER, I was unable to get one of them to fit with my new exhaust. The middle exhaust hanger simply would not go on. Regardless the exhaust still sits firmly and does not rattle. It might just be a 2016 problem, or error on my part. The parts are good, thanks cobb

Date published: 2016-07-17

Rated 5 out of 5 by Hayden from No issues I installed these hangers with the turboback exhaust from cobb and haven't had a problem. you can reach down and yank on the exhaust tips and feel how secure they are with these hangers. Honestly I don't know if they are necessarily better than the stock hangers with this Cobb exhaust. I never had an issue with stock exhaust/stock hangers. But I know these are very stiff and have the perfect amount of play.

Date published: 2016-12-24