COMP Cams Rocker Arm Studs/ 12-Point Nuts Set For LS1/ LS3 Engines

Don't underestimate the impact that these Rocker Arm Studs and 12-Point Nuts (4582-KIT) can make on your valve train assembly. This 12.9 hardware from COMP Cams improves clamping load for a higher-revving assembly with increased rigidity and stability.

Features and Benefits:
- Grade 12.9 Hardware
- 12-Point Nuts
- Improved Clamping Load
- Prevents Pulling of Threads in Aluminum Heads

This rocker stud and nut assembly is compatible with LS1 and LS3 engines. Built to preserve the threads on your aluminum cylinder heads, the assembly is especially beneficial when used on race applications that are consistently disassembled. Beyond that, the stud kit proves useful during installation of shaft mount rocker systems by accurately guiding the rocker arm assembly into position.

The 12-point flange nuts promote maximum lift potential through increased clearance to the rocker arms. Meanwhile, a rounded nose located on top of the stud prevents cross-threading of the nut during assembly. These high-strength studs will further prevent thread fatigue and pulling of threads in aluminum heads.