Dakota Digital VFD3 Digital Instrument Gauge System Chevrolet C10 1960-1963

If your classic truck's gauges are sluggish or have stopped working altogether, don't just replace them with a vintage set. Upgrade your technology without disturbing your interior. This VFD3 Digital Instrument Gauge System from Dakota Digital is made specifically for 1960-1963 Chevrolet C10 pickups. It will re-use your factory bezel for installation and be much more accurate and clear than your stock gauges.

Digital Gauges:
- Speedometer (0 - 255 MPH)
- Tachometer (0 - 17,500 RPM)
- Oil Pressure (0 -99 psi)
- Water Temperature (0 - 300ºF)
- Fuel Level (0 - 99%)
- Voltmeter (8 - 17 VDC)
- Colors: Blue or Teal

Lighting:
- High Brightness Vacuum Fluorescent

*This assembly fits the factory bezel (not included).

This gauge assembly (P/N: VFD3-60C-PU-Z) will directly replace your factory original without needing modifications to your vintage interior. Along with a more modern facade, this system offers modern functionality with six digital gauges and digital readouts that are easy to read with a quick glance. It includes a speedometer that runs to 255 MPH, a tachometer that runs up to 17,500 RPM, an oil pressure gauge measured in 1 psi increments, a water temperature gauge measured in 1 degree increments and a voltmeter that reads between 8 - 17 VDC. You can choose if you'd like the numbers to be displayed in blue or teal for added customization. The system uses high brightness vacuum fluorescent lighting for increased accuracy and easy-to-read information. The gauges are designed to be programmed and operated using the included buttons. You must calibrate the speedometer and set the cylinder count and fuel level gauge. Once they are properly configured, you can use the buttons to access the information stored in the digital message centers. For your convenience, the buttons can be mounted wherever is easiest for you to access in your cab.

In addition to the six gauges, there are two standard displays: the odometer and a dual trip meter that runs from 0 - 9,999.9 miles. Using the buttons, you can access the performance meters to get your MPH timer, 1/4 mile timer and speed recalls. This instrument system has built-in indicators for your turn signals, high beams, check engine and others you might need. The included gear position indicator requires P/N: GSS2000 to function; the part does not come with this assembly. Each of the included sensors comes with its own 10-foot harness and bushings. The speed sensor's harness replaces the tangle of GM style speedometer cables currently in your C10.

Digital Message Centers
Standard Displays:
- Odometer (one time user settable, Million Mile)
- Daul (A/B) Trip Meter (0 - 9,999.9)

Performance Meters:
- 0 - 60 MPH Timer
- 1/4 Mile Time
- 1/4 Mile End Time (trap speed)
- High Speed Recall
- High RPM Recall

Indicators:
- Turn Signals (left/right)
- High Beam
- Check Engine
- Parking Brake
- Cruise Control (when equipped)
- Gear Position (P/N: GSS-2000 required)
- 4 x 4 (when equipped)
- Wait to Start (when equipped)

Included Sensors:
- Water Temperature with 10ft Harness
- Oil Pressure with 10ft Harness
- Speed Sensor with 10ft Harness
- Bushings: 1/8" to 1/4", 3/8" and 1/2" NPT; 12mm and 15mm x 1.5 Threads

Please Note: GSS2000 is required for gear position indicator function (sold separately).

Order this Dakota Digital (VFD3-60C-PU-Z) VFD3 Digital Instrument Gauge System for your 1960, 1961, 1962 or 1963 Chevrolet C10 from CJ Pony Parts today!