Detroit Speed Front Speed 3 Kit Chevrolet C10 1970-1972

Take your 1970-1972 Chevrolet C10 to the next level with the Detroit Speed Front Speed 3 Kit (032094DS). This complete kit includes all the essential suspension and steering components you'll need to lower your front ride height by 4.5" and achieve an aggressive, modern look while enhancing your truck's handling. With forged aluminum uprights and a modern GMT800 truck hub pack, you can easily switch out your wheels.

Features and Benefits:
- Complete kit includes essential suspension and steering components
- Lowers front ride height by 4.5”
- 2.5” drop spindle assembly with forged aluminum uprights
- Provides an aggressive, modern look while enhancing handling
- Ensures strength and durability
- Improved suspension performance and cornering ability
- Modern GMT800 (1999-2006 Silverado) truck hub pack
- Compatible with different wheels
- Eliminates the need to pack wheel bearings
- 2” drop coil springs and shocks for improved ride comfort
- Also allows aftermarket brake options
- 1-7/16” diameter hollow sway bar is 127% stiffer than factory
- Hollow tube design with .188” and all-new 12.7:1 quick ratio steering gear
- “Detroit Tuned” rack and pinion valve technology
- 100% bolt-on for a quick and easy installation in your garage
- No need for specialized tools
- Made in the USA

Plus, the 2" drop coil springs and shocks deliver improved ride comfort while the 1-7/16" diameter hollow sway bar is 127% stiffer than factory, allowing for improved suspension performance and cornering ability. You can enjoy increased strength and durability thanks to the "Detroit Tuned" rack and pinion valve technology. This 100% bolt-on kit allows for a quick and easy installation in your garage without any specialized tools.

Kit Includes:
- Spindles
- Shocks
- Sway bar
- Rag joint
- Upper and lower ball joints
- Inner and outer tie rod ends with adjustment sleeves

Vehicle Fitment:
- 1970-1972 Chevrolet C10s

Tech Tip:
- Designed to use the GMT800 brake calipers, brackets, and pads (requires DSE 13” dual drilled rotors).

Please Note: You must use at least 17" wheels with a minimum inside wheel diameter of 16.250". GMT 800-style brakes are required for this installation.