Dynacorn Quarter Panel In Weld-Thru Primer Driver Side Full Mustang Convertible 1969
Highlights
- For Convertibles
- Stamped Steel Construction
- OEM-Style Replacement
- Weld-Thru Primer
Dynacorn Full Driver Side Quarter Panel in Weld-Thru Primer for 1969 Convertible Mustangs.
Dynacorn's Full Driver Side Quarter Panel in Weld-Thru Primer is not only capped off with valuable weld-thru primer but offers the unreputable heavy gauge stamped steel that is the highest of quality. This quarter panel is a high-quality direct fit replacement for the driver side of your 1969 Convertible Mustang.
Features and Benefits:
- Direct Replacement
- High-Quality, Heavy Gauge Stamped Steel
- Finished in Weld-Thru Primer
- Attaches to Taillight Panel & Quarter Panel Extensions
- Extends from Inside Door Jamb to Around Back of Mustang
- Goes Over the Top Body Line to Base of Roof Opening
- Includes Side Trunk Drain Channel
- Designed for Driver Side
Dynacorn's full quarter panel will span the same area as the original found on the 1969 Convertible Mustang. It will extend from the inside of the door jamb, wrapping around to the back of the car to the attaching point with the taillight panel & quarter panel extensions. This quarter panel also goes over the top body line to the base of the roof opening. Dynacorn also includes the side trunk drain channel with this quarter panel.
Advantages of Weld-Thru Primer:
- Reduces prep time when welding new parts to new parts that are both covered in the weld thru primer
- Reduced spatter
- Lower distortion of the panels
- Superior conductive properties that help minimize high heat zone problems
- Helps when welding a new panel to old metal
Lowering the resistance at the weld surface allows better penetration into the denser, new steel that helps forgive an old alloy's problems with porosity and impurities, which is why Dynacorn chooses to coat your brand-new quarter panel in weld-thru primer. Now you can prevent resin build-up between welds that can trap moisture in the old porous steel that leads to failure at the weld borders and eliminate corrosion that would form between overlapped panels or multi-layered spot welds.
Please Note: This trunk lid will NOT fit on Coupes or Fastbacks.
California Residents: Proposition 65 Warning
Related Categories: Mustang Parts, Mustang Body & Sheet Metal, Mustang Quarter Panels
Vehicle Fitment
This product will fit the following Mustang years:









