Edelbrock Cylinder Head With Script Logo Ford Flathead
Highlights
- Improved Engine Performance
- Black Finish
- Simple Installation
- Edelbrock Logos
Edelbrock Flathead Ford Cylinder Head With Script Logo.
These Edelbrock Flathead Cylinder Heads feature the original Edelbrock script logo design for Fords and Mercurys. They're cast at the Edelbrock Foundry in the USA of T-6 tempered A356 aluminum. These heads are rugged, ribbed internally and externally, with a large water capacity and excellent breathing characteristics.
Features and Benefits:
- High Strength Casting
- Sold As A Pair
- Higher Compression
- Black Finish
The 65cc heads support 8.0:1 compression ratio on blocks with a 3/16 base relief (stock bore and stroke), compression ratio increase is approximately 3/10 of a percent with each 1/8 stroke. High Lift/Large Chamber versions feature a new raised roof combustion chamber design that is CNC machined for high lift cams and is perfect for reducing compression in supercharger applications or on low octane fuel. High Lift heads have increased valve clearance and increased flow capacity.
Tech Tip: Match these heads with our popular Ford Flathead Intake Manifolds.
California Residents: Proposition 65 Warning
Related Categories: Ford F-100 Parts, F-100 Engine, F-100 Restomod, F-100 Cylinder Heads, F-100 Restomod Engine
Only for use on pre-pollution controlled vehicles: This product can be used on vehicles that were manufactured before emissions control regulations were imposed. Pre-pollution vehicles are defined as:
- 1965 and older U.S. manufactured California certified vehicles
- 1967 and older U.S. manufactured federally certified vehicles
Vehicle Fitment
This product will fit the following F-100 years:
- 1949,
- 1950,
- 1951,
- 1952,
- 1953,
