Edelbrock Fuel Pump Performer RPM Series Mechanical Street 110 GPH For Use With Gas Only Small Block Chevy V8
Highlights
- Three-Stage Polished Finish
- Mechanical Pump
- For Use with Gasoline Only
- Made in the USA
Edelbrock Mechanical Street 110 GPH Performer RPM Series Fuel Pump for Small Block Chevy V8 Engines using Gas Only.
The Edelbrock Mechanical Street Performer RPM Series Fuel Pump (1721) is designed to support "W Series" and Small Block Chevy V8 Engines up to 600 horsepower. It features a flow rate of 110 GPH and is intended for use with gasoline only. Feel free to use it with all Edelbrock carburetors found in Performer or Performer RPM applications.
Features and Benefits:
- Premium Three-Stage Polished Finish
- Valve Design Improves Flow
- Supports Engines up to 600 Horsepower
- Does Not Require a Regulator
- Clockable Lower Housing Rotates in 60-Degree Incrments
The Fuel Pump is a great-looking part with a three-stage polished finish and a unique valve design that optimizes flow quantity and quality. Plus, you'll find that the high-volume, 3/8-inch NPT inlet and outlet surpasses the capacity of traditional models.
The Fuel Pump produces 6 psi and does not require a regulator. To achieve the ideal inlet/outlet alignment, rotate the clockable lower housing in 60-degree increments.
Please Note: Use with gasoline only.
California Residents: Proposition 65 Warning
Related Categories: Chevrolet C10 Parts, C10 Restomod, C10 Engine, C10 Fuel Pumps & Filters, C10 Restomod Engine
Only for use on pre-pollution controlled vehicles: This product can be used on vehicles that were manufactured before emissions control regulations were imposed. Pre-pollution vehicles are defined as:
- 1965 and older U.S. manufactured California certified vehicles
- 1967 and older U.S. manufactured federally certified vehicles
Installation Difficulty
Novice skill is required for this installation.
