Edelbrock Intake Manifold Performer EPS Small Block Chevrolet 1955-1986

Edelbrock:
2701

Highlights

  • Modern Runner Design
  • Torque and HP Gains
  • Dyno Proven
  • Made in the USA
$176.35

Edelbrock Performer EPS Intake Manifold for 1955, 1956, 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, and 1986 Small Block Chevrolet Engines.

Bring your 1955-1986 Small Block Chevy engine up to speed with Edelbrock's modern runner design found on the Performer EPS Intake Manifold (2701). Have no fear. It's dyno tested and tuned for peak torque at 3,500 RPM on 350-inch engines. When paired with an Edelbrock square-bore Performer Series or Thunder Series AVS carburetor, your 262-400 cubic-inch Chevy will crank out optimum performance. 

Features and Benefits:
- Modern Runner Design
- Tuned for Peak Torque at 3,500 RPM on 350-Inch Engine 
- Ideal for Power from Off-Idle to 5,500 RPM 
- Proudly Made in the USA! 

Specifications:
- Manifold Height: A-3.74, B-4.80
- Carb Pad Height: 4.27
- Port Exit Dimensions: 1.15 x 1.87

The Performer EPS dual-plane Intake Manifold is ideal for power from off-idle to 5,500 RPM. Best of all, dyno tests showed gains of 5 horsepower and 9 ft-lbs. of torque over the Edelbrock Performer manifold (EDL2101) on a 350 Chevy. From 3,000 to 4,500 RPM, the increases averaged 5+ ft-lbs. of torque. With Edelbrock's Performer EPS, you don't have to compromise on power. 

Tech Tips: 
- Carburetor recommendations: Edelbrock Thunder Series AVS or Performer Series carb, 500-650 cfm.
- Intake gasket recommendations: EDL7201.
- Camshaft recommendations: EDL2102, EDL2103, EDL2208, EDl2209.

Please Note: Will not fit under stock Corvette hood.

California Residents: Proposition 65 Warning

Only for use on pre-pollution controlled vehicles: This product can be used on vehicles that were manufactured before emissions control regulations were imposed. Pre-pollution vehicles are defined as:

  • 1965 and older U.S. manufactured California certified vehicles
  • 1967 and older U.S. manufactured federally certified vehicles

Vehicle Fitment

This product will fit the following C10 years:

Only registered users can ask/answer questions. Please sign in or create an account.
Write Your Own Review
Only registered users can write reviews. Please sign in or create an account.