Edelbrock Intake Manifold Performer For Vortec Heads 90-Degree GM V6 3.8L/ 4.3L

The Edelbrock Performer Intake Manifold (2114) is the perfect addition to your GM 90-degree V6 3.8L or 4.3L engine with Vortec cylinder heads. Using Edelbrock p/n: EDL2111 as its base, this Performer Series Intake Manifold is optimized for the engine swap market, specifically 1985 and later Chevy 200-229-262 c.i.d. V6 engines. 

Features and Benefits:
- Fits GM 90-Degree V6 3.8L and 4.3L Engines with Vortec Cylinder Heads
- Lightweight Aluminum Construction 
- Low-Rise, Dual-Plane Design 
- Idle to 5,500 Operating Range
- Proudly Made in the USA!

The Performer's low-rise design means it won't interfere with minimal hood clearance. The part's design features a combination of dual-plane characteristics with patented runner timing and a 180-degree firing order. The competition simply can't say the same for their components. 

The Vortec head design is perfect for hot rodders looking to step up their game with increased flow. With demonstrated throttle response improvements, it's certainly a step up from stock. And, it'll boost torque over a wide RPM range, from idle to 5,500 RPM. 

Specifications:
- Manifold Height: A-3.50, B-4.18
- Carb Pad Height: 3.84
- Port Exit Dimensions: Port Exit is 2.05 Tall with Slanted Side Walls

Edelbrock's Intake Manifold features provisions for external water bypass and may be used on either Vortec blocks or 1995 and earlier blocks. It's compatible with Edelbrock Thunder Series AVS or Performer Series 500 cfm carburetors, and it accepts late model water neck, alternator, HEI, and air conditioning.

Tech Tip: Recommended carburetor: Edelbrock Thunder Series AVS or Performer Series carb, 500 cfm.