Edelbrock Intake Manifold Performer Truck With EGR Ford 5.0L EFI Small Block V8 1987-1996

Lend a little more power to your 1987-1996 Ford 5.0L EFI Small Block V8 Engine using Edelbrock's innovative airflow technology. The modular design featured on their Performer Truck Intake Manifold (3841) with EGR supports maximum torque gains in the mid-range where your rig most needs it! 

Features and Benefits:
- Modular Design with Modern Airflow Tech 
- Boosts Torque Gains in the Mid-Range
- Broad Power Range from Idle to 5500 RPM 
- Removable Plenum Cover Provides Access to Runners 
- Proudly Made in the USA! 

Seize the opportunity to optimize performance. Edelbrock's Intake Manifold boasts a broad power range from idle to 5500 rpm. And, the base manifold is CNC port matched to the upper manifold with maximum performance in mind. With a removable plenum cover in place, you can easily access the runners and make desired modifications. 

Specifications:
- Center Maximum Height: 13.250 in
- Front Maximum Height: 13.250 in
- Material: Aluminum
- Rear Maximum Height: 13.250 in
- Single Or Dual Plane Type: Single Plane

The upper and plenum cover are finished in a light titanium gray powder coat. The base is satin aluminum and not powder coated. This Edelbrock Intake Manifold will accept all stock hardware. Pair it with a stock or stock replacement twin throttle body.

Tech Tips: 
- Edelbrock intake gasket p/n: EDL7220 is recommended for installation. 
- Use with stock or stock replacement twin throttle body.

Additional Notes: 
- Hardened washers must be used with intake bolts to ensure proper torque and prevent galling of the aluminum.
- Use RTV sealant to properly seal end seals, such as Edelbrock High Temp Silicone sealant. Do not use end seals gaskets.