Edelbrock Pro-Flo 4 EFI ECU And Electronics Kit SBC/ BBC

Upgrade your small or big block Chevy with Edelbrock’s Pro-Flo 4 EFI ECU and electronics kit, a plug-and-play solution. This kit includes everything you need: ECU, sensors, distributor, wide-band O2 sensor, and wiring harness, giving you both fuel and spark control. With self-learning capabilities and Edelbrock’s intuitive E-Tuner app for iOS and Android, you will get precise adjustments to air-fuel ratios, ignition timing, idle speed, and more. This system offers reliable power gains, smoother drivability, and modern tuning control for your classic C10 or C/K.

Features and Benefits:
- Complete ECU and electronics kit for SB/BB Chevrolet
- Includes ECU, wiring harness, distributor, wide-band O2, and sensors
- Self-learning ECU maintains target air-fuel ratio automatically
- Supports tuning of AFR, ignition curve, idle speed, rev limiters, and fans
- Compatible with Edelbrock E-Tuner app for iOS/Android devices
- Works with 29, 35, 42, or 60 lb./hr. injectors (80 lb./hr. with 2-bar MAP for boosted setups)
- Plug-and-play installation with existing EFI induction system
- Provides both fuel and spark control for superior performance

Vehicle Fitment:
- Chevy C10 1960-1987 
- Chevy C/K 1988-1998

Additional Notes:
- The customer must provide an induction system including a manifold, throttle body, fuel rails, and injectors. Also, a fuel pump, regulator, or fuel lines are not included. Users must refer to the Calibration Matrix in the instructions for the required injector size depending on engine cubic inches and HP requirements.
- Required injector sizes 29 lb./hr., 35 lb./hr., 42 lb./hr., and 60 lb./hr.
- Compatibility with forced induction applications requires 80 lb./hr. injectors.