Edelbrock Twin-Force Stage 2-3 Upgrade Kit 3.5L EcoBoost F-150/ Raptor 2017-2020
Highlights
- 54% Airflow Increase
- 52% Turbine Flow Increase
- Bolt-On Installation
- Made In The USA
Edelbrock Twin-Force Stage 2 to 3 Turbo System Upgrade Kit for 2017-2020 F-150s and F-150 Raptors with a 3.5L V6 EcoBoost Engine.
If you’re looking to take your 2017-2020 F-150 with a 3.5L V6 EcoBoost engine to the next level, look no further than the Edelbrock Twin-Force Stage 2 to 3 Turbo System Upgrade Kit (158338). This direct-fit upgrade for Stage 2 kits adds driver and passenger-side Garrett turbochargers, a Stage 3 electronic fuel pump booster, and matching calibration for a 54% increase in airflow over stock.
Features and Benefits:
- Adds driver and passenger-side Garrett turbochargers
- Stage 3 electronic fuel pump booster and matching calibration
- 54% increase in airflow over stock
- Direct-fit upgrade for Stage 2 kits
- 60mm billet compressor wheel increases compressor efficiency
- 50mm Inconel turbine wheel and .45 A/R stainless steel turbine housing
- 52% increase in turbine flow
- 2.75” compressor inlets are 38% larger than stock
- Increased power potential
- Bolt-on installation
- Made in the USA
The 60mm billet compressor wheel increases compressor efficiency, while the 50mm Inconel turbine wheel and .45 A/R stainless steel turbine housing provide a 52% increase in turbine flow. The 2.75” compressor inlets are 38% larger than stock, and the bolt-on installation means you can enjoy increased power potential with ease. Made in the USA, this kit is the serious upgrade you've been searching for.
California Residents: Proposition 65 Warning
Related Categories: Ford F-150 Parts, F-150 Engine, F-150 Turbochargers
Note: This item is not CARB (California Air Resource Board) exempt and is not legal for sale or use in the state of California.
Installation Difficulty

Intermediate skill is required for this installation.












