Eibach Pro-Lift-Kit 2-1/2" Front Lift Springs F-150 Raptor 2017-2020



  • Levels Suspension Stance
  • Balanced Ride Quality
  • Off Road Race Technology
  • Proudly Made in the USA!
MSRP $354.44
You save 10%

Eibach 2-1/2" Pro-Lift-Kit Front Lift Springs for 2017, 2018, 2019 and 2020 Ford F-150 Raptors.

Level out your 2017-2020 Ford F-150 Raptor with these Eibach (E30-35-038-01-20) 2-1/2” Pro-Lift-Kit Front Lift Springs. Designed to provide your vehicle a suspension lift, these Pro-Lift-Kit Front Lift Springs do not require coilover systems or spacer lifts. These spring lifts allow for a full range of suspension travel without adding stress to your bushings and ball-joints.

Features and Benefits:
- Raises the front suspension for a level stance
- Does not require coilover systems or spacer lifts
- Manufactured using race winning off-road race spring technology
- Provide balanced ride quality, control and off-road capability
- Made in the USA

These lift springs are carefully tested to provide unparalleled off-road capability and ride quality. Manufactured and engineered using the same technology used in Eibach’s ERO Off-Road Race Springs, these lift springs work at the championship level. Once your new Eibach 2-1/2” Pro-Lift-Kit Front Lift Springs are installed on your 2017-2020 F-150 Raptor you can expect a level stance, increased bump travel, and off-road performance capable of handling any terrain in your path!

- OE rate: 93 N/mm (533 lbs/in)
- Pro-Lift-Kit rate: 102 N/mm (583 lbs/in)
- Bump-stop: OE
- Damper: OE
- Tubing: N/A
- OE hub center to fender: 608 mm
- Pro-Lift-Kit hub center to fender: 672 mm
- OE Camber = -0.9 -0.7deg (+/-0.1 deg)
- Pro-Lift-Kit Camber = -0.4 deg
- OE Toe: 0 - 0.2 deg (+/-0.10 deg)
- Pro-Lift-Kit Toe: 0.1 deg

Vehicle Fitment:
- 2017-2020 Ford F-150 Raptor

California Residents: Proposition 65 Warning

Installation Videos

Video Transcript

The 2017 Raptor comes with quite a bit of a rake from the factory. Today, we're looking at this Eibach 2 1/2 inch Pro-Lift-Kit Front Lift kit, fitting your 2017 F-150 Raptor.

If you want to lift the front of your Raptor to make it level with rear, for more ground clearance and an aggressive look, this Eibach spring kit is a great idea.

Made right here in the USA, these springs are going to directly replace the front springs to lift the front of your truck 2 1/2 inches for better off road capabilities with no other modifications required.

Installation of these springs is pretty straightforward. They're sold as a pair and can be found along with other parts for your Raptor at CJPonyParts.com.

Vehicle Fitment

This product will fit the following F-150 years:

Only registered users can ask/answer questions. Please sign in or create an account.
Write Your Own Review
Only registered users can write reviews. Please sign in or create an account.