AMK Products Master Engine Fastener Kit With Standard Exhaust Manifolds 352/390 1958-1965

This Master Engine Fastener Kit from AMK Products includes 149 total pieces of factory correct, OE style fasteners that are required to properly reassemble the engine components which attach to the long-block on your 352 or 390 FE big block V8 engine. This kit is specifically assembled for most 1958-1965 Ford and Mercury vehicles equipped with a 352 or 390 FE big block V8 engine and standard exhaust manifolds.

AMK Products' Master Engine Fastener Kit includes individually packaged sets of hardware for various applications on your 352 or 390 FE big block engine. Each package is thoroughly labeled so you know exactly where it goes on your big block V8 engine. The individual sets of hardware also include the total number of pieces that are required for the specific application. Most of the included fasteners are either meticulous reproductions of the originals or new old stock!

Master Engine Fastener Kit Includes:
- Air Cleaner: Stamped Wing Nut (1)
- Carburetor without Spacer: Studs, 7/16" Nuts (8)
- Crank Pulley: Hex Place Bolts (3)
- Crankshaft Damper: Hex Bolt, Flat Washer (2)
- Distributor: Hex Screw/Split Washer Assembly (1)
- Distributor Points and Condenser Single: Slot Pan Head Machine Screws (3)
- Distributor Vacuum Unit: Slot Pan Head Screws (2)
- Engine Block Drain Plugs: External Hex Pipe Plugs (2)
- Engine Fan: 2-3/8" Hex Screw/Split Washer Assembly (4)
- Engine Fan to Clutch: Hex Screw/Split Washer Assembly (4)
- Exhaust Manifolds: Lock Tabs, Hex Bolts "F", Flat Washers (48)
- Fuel Pump: Hex Screw/Split Washer Assembly (2)
- Ignition Coil Strap and Bracket: Hex Screw/Split Washer Assembly, Hex Washer Head Screw, Hex Nut (3)
- Intake Manifold: Hex Place Bolts (10)
- Oil Filter Adapter: Hex Screw/Split Washer Assembly (4)
- Oil Pan: Special Hex Screw/Split Washer Assembly (20)
- Starter: Hex Bolts, Split Washers (6)
- Timing Cover: Hex Washer Head Screws, Hex Machine Screws (10)
- Valve Covers: Special Hex Screw/Split Washer Assembly (10)
- Water Neck: Hex Screw/Split Washer Assembly (2)
- Water Pump: Hex Screw/Split Washer Assembly, Hex Bolt at Lower Right Side (4)

Buying individual sets of engine hardware for your 352 or 390 FE big block engine can be expensive and time consuming if you're not sure which hardware you need. This Master Engine Fastener Kit makes it easy by including authentic style hardware that specifically fits your 1958-1965 Ford or Mercury vehicle equipped with a 352 or 390 FE big block V8 engine and standard exhaust manifolds. With a Master Engine Fastener Kit from AMK Products, you will not only save time and money, but you will have the confidence knowing your 352 or 390 FE big block engine is going to be reassembled with the finest factory correct hardware on the market!

AMK Products produces the most factory correct hardware for your classic 60's era Ford or Mercury. No matter what kind of car you're building, there's no company better for nuts and bolts than AMK Products!