AMK Products Master Engine Fastener Kit 428CJ/SCJ 1969

This Master Engine Fastener Kit from AMK Products includes 157 total pieces of factory correct, OE style fasteners that are required to properly reassemble the engine components which attach to the long-block on your 1969 Mustang or 1969 Shelby GT500's 428 Cobra Jet or Super Cobra Jet engine. This kit is specifically assembled for all 1969 Shelby GT500s and 1969 Mustangs equipped with a 428 Cobra Jet or Super Cobra Jet engine.

AMK Products' Master Engine Fastener Kit includes individually packaged sets of hardware for various applications on your 1969 Mustang or 1969 Shelby GT500's 428 Cobra Jet or Super Cobra Jet engine. Each package is thoroughly labeled so you know exactly where it goes on your FE big block engine. The individual sets of hardware also include the total number of pieces that are required for the specific application. Most of the included fasteners are either meticulous reproductions of the originals or new old stock!

Master Engine Fastener Kit Includes:
- Air Cleaner: Ram-Air 2.6" Stud, Wing Nut (2)
- Air Cleaner Ram-Air Top: Phillips Pan Head Screws, External Nut/Washer Assembly (6)
- Air Cleaner Shroud and Tube: External Nut/Washer Assembly, Hex Washer Head Sheet Metal Screw (5)
- Air Cleaner Snorkel: Hex Washer Head Screws (2)
- Carburetor: Studs, 7/16" Nuts (8)
- Crank Pulley: Hex Place Bolts (3)
- Crankshaft Damper: Hex Bolt, Flat Washer (2)
- Distributor: Hex Screw/Split Washer Assembly (1)
- Distributor Points and Condenser Dual Point: Slot Pan Head Machine Screws (5)
- Distributor Vacuum Unit: Slot Pan Head Screws (2)
- Engine Block Drain Plugs: External Hex Pipe Plugs (2)
- Engine Fan to Clutch: Hex Screw/Split Washer Assembly (4)
- Engine Fan Clutch to Water Pump: 7/16" Hex Screw/Split Washer Assembly, "SEMS" (4)
- Engine Lift Hook: Left Side Hex Bolt (1)
- Exhaust Manifolds: Special Ramp-Lok Hex Bolts, 2 with Studs (32)
- Fuel Pump: Hex Screw/Split Washer Assembly (2)
- Ignition Coil Strap and Bracket: Hex Screw/Split Washer Assembly, Hex Washer Head Screw, Hex Nut (3)
- Intake Manifold: Hex Place Bolts, Stud, Spacers (12)
- Oil Filter Adapter: Hex Screw/Split Washer Assembly (4)
- Oil Pan with Windage Tray: .75" Special Hex Screw/Split Washer Assembly (20)
- PCV Hoses: Wire Clamps (4)
- Starter: Hex Screw/Split Washer Assembly (3)
- Timing Cover: Hex Washer Head Screws, Hex Bolt, Hex Machine Screws (10)
- Valve Covers: Special Hex Screw/Split Washer Assembly (10)
- Valve Covers Aluminum "L" Brackets: Phillips Pan Head Machine Screws (4)
- Water Neck: Hex Screw/Split Washer Assembly (2)
- Water Pump: Hex Screw/Split Washer Assembly, Hex Bolt at Lower Right Side (4)

Buying individual sets of engine hardware for your 1969 Mustang or 1969 Shelby GT500's 428 Cobra Jet or Super Cobra Jet engine can be expensive and time consuming if you're not sure which hardware you need. This Master Engine Fastener Kit makes it easy by including authentic style hardware that specifically fits your 1969 Shelby GT500 or 1969 Mustang equipped with a 428 Cobra Jet or Super Cobra Jet engine. With a Master Engine Fastener Kit from AMK Products, you will not only save time and money, but you will have the confidence knowing your 1969 Mustang or 1969 Shelby GT500's 428 Cobra Jet or Super Cobra Jet engine is going to be reassembled with the finest factory correct hardware on the market!

AMK Products produces the most factory correct hardware for your classic Mustang. No matter what kind of Mustang you're building, there's no company better for nuts and bolts than AMK Products!