Fabtech Uniball 4" Upper Control Arm Lift Kit 4-Door Bronco 21-26 W/ Dirt Logic 2.5 Coilover

The Uniball Upper Control Arm Lift Kit increases front suspension travel, enhancing offroad experiences with the clearance to run 35" tires on your 2021-2026 4-Door Bronco without OEM Bilstein shocks. Front and rear height will be level, for an aggressive appearance. This system is great for additional suspension performance without excessive lift height.

Features and Benefits:
- Eliminates upper ball joint w/ super strong 1" ID Stainless American Uniball
- Chromoly tubing reduces flex found in stock arms for more positive road feel
- Stainless steel heat-treated Uniball pin fits into factory ball joint taper without modification
- Great system for the daily driver that requires increased offroad performance
- Adjustable lower rear link arms for increased strength & articulation
- Front and rear dirt logic 2.5 coilover shocks

Fabtech Uniball Upper Control Arms provide added wheel travel, with an extra degree of caster compared to stock control arms. The increased caster improves steering effort with oversize tires. The upper control arms are built from the finest materials, with .120" wall 1.25" OD 4130 Chromoly steel tubing. 1" FK stainless PTFE-lined Uniball bearings replace the OEM ball joints, for increased travel without binding.

These stout Bronco upper control arms are designed for longevity in offroad conditions while providing a positive on-road feel. Fabtech upper control arms are designed to work in conjunction with the Dirt Logic 2.5 Coilover shocks to provide additional front wheel travel.

Tech Tip:
- Use 35/12.50R17 tires w/ 17×9 wheels w/ 4 1/2″ BS w/ minor trimming
- Use 35/12.50R18 tires w/ 18×9 wheels w/ 4 1/2″ BS w/ minor trimming
- Use 35/12.50R20 tires w/ 20×9 wheels w/ 4 1/2″ BS w/ minor trimming