Fabtech Control Arm System Uniball 4" Lift Without Bilstein Shocks Bronco 2021-2024
Highlights
- Sold as a Complete Kit
- Clears Oversize Tires
- Good Handling Characteristics
- Increased Offroad Performance
Fabtech Uniball 4" Lift Control Arm System Without Bilstein Shocks for 2021-2024 Broncos.
This 4" Uniball Lift Kit from Fabtech (K2384) will clear 35" tires and reinforce the front suspension for offroad use. In addition to the more aggressive look, this system provides good handling on or off the street.
Features and Benefits:
- Arms eliminate upper ball joint w/ super strong 1" ID Stainless American Uniball
- Chromoly tubing reduces flex found in stock arms for more positive road feel
- 17-4 Stainless Steel Heat treated Uniball pin fits into factory ball joint taper without modification to the spindle
- Retains stock Coilover shocks for a factory ride
- Heavy Duty Track Bar bracket re-centers axle under the vehicle for proper tracking
The factory Bronco upper control arms are replaced with Fabtech’s Uniball Upper Control Arms that provide additional wheel travel with an extra degree of caster compared to stock arms. The increased caster helps to balance steering effort with oversized tires.
The Fabtech upper control arms are constructed of the finest material with .120" wall 1.25" OD 4130 Chromoly steel tubing. High-quality 1" FK Stainless PTFE lined Uniball bearings are utilized in place of the small factory ball joints and allow for increased travel without binding.
These super stout Bronco upper control arms are designed for longevity in rugged offroad conditions while providing a more positive on road feel. The factory front and rear Coilover shocks are retained and receive spacers that provide height while maintaining the comfortable stock highway ride quality.
With the increased ride height, the rear axle becomes offset to the vehicle. Fabtech addresses this with a heavy-duty track bar relocation bracket that re-centers the axle under the vehicle. This provides proper tracking of the axle to the vehicle as Ford intended it.
This Bronco lift kit is an affordable suspension upgrade for enthusiasts that desire to run 35" tall tires with Fabtech quality and strength.
Please Note: Designed for use on 2- or 4-door models without factory Bilstein shocks only. Does not fit the Bronco Sport.
California Residents: Proposition 65 Warning
Related Categories: Ford Bronco Parts, Bronco Suspension, Bronco Lift Kits
Installation Difficulty
Intermediate skill is required for this installation.