Ford Performance Tie-Down Kit Fastback 2015-2021

Ford Performance:
M-1700-M
Rating:
100% of 100

Highlights

  • Tie-Downs For Transport
  • As Used On Cobra Jet
  • Not For Use On Convertibles
  • Detailed Instructions
MSRP $104.00
$89.99
You save 13%

Ford Performance Tie-Down Kit for all 2015, 2016, 2017, 2018, 2019, 2020 and 2021 Fastback Mustangs.

If you own a 2015-2021 Mustang S550 Fastback, then you're probably already well aware that's it's tough to find a good spot to hook a strap so you can properly secure your Pony for transport. Fortunately, Ford Performance came up with a perfect solution for this problem: This Ford Performance Tie-Down Kit!

Features and Benefits:
- As Used on 2016 Cobra Jets
- Securely Straps Your Mustang to a Dyno or Trailer
- Includes Front and Rear Tie-Down Hooks for Transport
- Rear Hooks Mount Just in Front of Rear Tires on the Frame Rail
- Front Hooks Attach to Frame Rail Next to the K-Member
- Made Out of Sturdy Steel
- Fits All 2015-2021 Mustang Fastbacks
- Made in the USA

*Does not fit convertibles models due to the additional brackets in the rear.

This Ford Performance M-1700-M Tie-Down Kit will help securely hold your Mustang to a dyno or trailer so it'll stay in place and you won't have to worry about it coming loose! It includes front and rear tie-down hooks. The front hooks will attach to the frame rail next to the K-member, and the rear hooks will mount just in front of your rear tires on the frame rail. Each piece of this kit is constructed from sturdy steel, and this kit will work on all 2015-2021 Fastback Mustangs. Even better? This Tie-Down Kit is proudly made right here in the USA!

This Kit Includes:
- Four (4) Brackets
- Eight (8) Mounting Bolts
- Installation Instructions

Please Note: This Tie-Down Kit may not be compatible with aftermarket jacking rails.

By buying your Ford Performance parts from CJ Pony Parts, you know you're getting your Mustang parts from a reliable, reputable dealer, since CJ Pony Parts is a Top 10 Ford Performance Dealer and has been for the last 10 years. When you buy your Ford Performance Mustang parts from CJ Pony Parts, you know you have a winning combination--this means dependable, quality care for your Pony car.

California Residents: Proposition 65 Warning

Installation Videos

Video Transcript

While the term trailer queen is often derogatory, there's a lot of times it actually makes sense to trailer your car. If you're going a long distance, you're going to the track and worrying about something breaking, a trailer's nice insurance to have. We have this S550 Mustang and need to trailer your car, it's an excellent way to tie it down. That's using the Ford performance tie down kit. Today, we're going to show you how to install it.

This Ford performance tie down kit's going to fit all 2015 through 2019 Mustangs. It was originally found on the Cobra Jet Mustangs. These are great as they're made of heavy duty sturdy steel, use factory holes in the car and allow you to tie down a car on a trailer or on the Dyno. The installation is very simple and today we're going to show you how to install one on 2018 Orange Fury Mustang.

For this installation today, lift or a jack and jack stands. 3/8 ratchet, 13 millimeter socket, 15 millimeter socket and a torque wrench.

The installation for the passenger and driver side's exactly the same. We're going to do the driver side and start with the front. Remove these two factory bolts on the front section here. Hold the bracket up. Make sure to line it up with the included hardware. Make sure everything goes in properly. This, you have a little bit of adjustment here to get it exactly where you want it. Before we actually put it in though, we're going to remove the hardware and install some blue Loctite. Then move onto the rears. For the rear hooks it's going to use these two factory holes here. These won't have any hardware in them. Just take the supplied hardware, again just thread it in. We're going to put some Loctite on and bolt them in place. Now we're going to go back and torque everything to 55 foot pounds. Repeat the process on the other side and your installation's finished.

Because of the design of the Ford performance tie downs, they will not work with jacking rails or the Steeda IRS braces.

The Ford performance tie downs were very easy installation and the next time this car goes anywhere in the trailer or needs to go to the Dyno, much easier to strap it down as well. The installation is very straightforward as you saw. This is no more than maybe half an hour, 45 minutes. Back on the road in no time.

Vehicle Fitment

This product will fit the following Mustang years:

Only registered users can ask/answer questions. Please sign in or create an account.
Write Your Own Review
Only registered users can write reviews. Please sign in or create an account.
Complete Your Package
Add to Cart