Ford Wheel Well Liners Rear Pair F-150 2015-2020

99% of 100


  • Fits 2015-2020 F-150s
  • Plastic Construction
  • Easy Installation
  • Sold As A Pair
MSRP $232.99
You save 6%

Pair of Ford Rear Wheel Well Liners for 2015, 2016, 2017, 2018, 2019 and 2020 F-150s.

If you're looking for an easy and stylish way to protect your 2015-2020 F-150 from rust and other problems caused by rocks, dirt and road debris kick up, then your search is over! Check out this Pair of Ford FL3Z-9927886-D Rear Wheel Well Liners to ensure you’ve got the protection for the body of your pick-up you’re looking for.

Features and Benefits:
- Custom molded to fit rear wheel well contours
- Charcoal black color scheme
- Protects and shields body-colored parts
- Protects and shields numerous underpinnings within the rear wheelhouses
- Meets Ford’s rigorous fit and durability standards
- No drilling or vehicle modifications
- Easily installed

*Sold as a pair.

These heavy-duty wheel well liners will protect your paint job against scratches and dings from road debris kick-up while ensuring your underpinnings within the rear wheelhouses are safe and secure. These custom molded liners will fit like a glove inside your rear wheel well liners. As one of the only liners authorized by Ford Motor Company, these liners meet the rigorous Ford fit and durability standards. Easily installed, these liners come with all the hardware you’ll need.

Please Note: Works on both 2wd and 4wd models. Will not fit Raptor model.

California Residents: Proposition 65 Warning

Related Categories: Ford F-150 Parts, F-150 Body & Appearance

Installation Videos

Video Transcript

We’re installing these Ford wheel well guards.

These genuine Ford wheel well splash guards are gonna fit your 2015 through 2018 F-150 in either a two or four-wheel drive. Unfortunately, they will not fit the Raptor. These are custom molded and have an OE quality finish, with black plastic that will shield and also look better than the factory piece. Also, depending on the color of your truck, this can cover up the painted side of the bed, which is very obvious when looking at the wheel wells.

As you can see, this area is pretty exposed, and it just doesn't look finished. These liners are really gonna make it look a whole lot better. Before you install them, there's four clips that you need to install. Grab two of these clips right here, and install them on the bed frame. They're gonna go right here over this hole. The second clip is gonna go more towards the rear. Grab two of these clips. One clip is gonna go in the front of the fender, and the other one is gonna go in the back of the fender. Just push them in the hole. Do the same thing up front.

The liner can now be installed. You're gonna lift it, and flip it up and over the tire. Then you're gonna position it behind the fender. The fender liner is in place. Now each clip that you installed gets a screw. Tighten down each screw with a seven millimeter socket. I'm not gonna fully tighten all the screws just yet. I want there to be a little bit of play so I can get everything installed. Okay, you have all four screws installed. There's two more clips to install now. One on the front, and then one on the back of the liner. Get the liner lined up with the factory hole, and just push the clip in.

Okay, we have everything in place now. Now we can go back and tighten up all four of the screws. Then repeat the process for the other side. Then we're done. Our wheel well guards are installed. They give this truck a much more finished look. I don't know it didn't come with it from the factory, but it looks so much better. Installation is really not too bad. It should only take you about 45 minutes to an hour, and before you know it, you'll be heading off-road.

Vehicle Fitment

This product will fit the following F-150 years:

Only registered users can ask/answer questions. Please sign in or create an account.
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account