FOX Adventure Series Front Strut Adjustable 1"-3.5" Drop Ford F-150 15-26
Highlights
- Adjustable 1"-3.5" Drop
- FOX 2.0 Monotube Design
- Six Ride Height Positions
- Bolt-On Installation
FOX Adventure Series Front Strut for 2015-2026 2WD and 4WD Ford F-150s.
Lower your 2015-2026 Ford F-150 while maintaining comfortable street manners with this FOX Adventure Series Front Strut. Designed for 2WD and 4WD trucks, this street-focused strut provides six ride height positions adjustable in 1/2" increments from a 1" to 3.5" front drop. The snap ring collar adjustment system lets you dial in the desired stance while retaining the factory spring and top hat.
Features and Benefits:
- Compatible with 2WD and 4WD trucks
- Provides an adjustable 1"-3.5" front drop
- Six ride height positions
- Adjusts in 1/2" increments using a snap ring collar system
- Street-focused design balances ride comfort and handling
- Retains the factory spring and top hat
- FOX Factory 2.0 monotube construction
- Internal floating piston separates shock oil from high-pressure nitrogen gas
- IFP design helps prevent oil aeration and damping fade
- Smooth-bore, honed seamless alloy body
- Large 1.834" diameter piston improves damping performance
- FOX JM92 Advanced Suspension Fluid performs across varying temperatures
- 5/8" hard chrome-plated, heat-treated alloy steel shaft
- Nitrile rubber bushings help reduce noise, vibration, and harshness
- Steel body with durable silver powder-coated finish
- Bolt-on installation requires no welding or fabrication
- Made in the USA
FOX's 2.0 monotube design uses an internal floating piston to separate the shock oil from the high-pressure nitrogen-charged gas chamber, helping prevent oil aeration and maintain consistent damping during demanding use. A smooth-bore, honed seamless alloy body works with a large 1.834" diameter piston, while FOX JM92 Advanced Suspension Fluid maintains performance across varying temperatures. The 5/8" hard chrome-plated, heat-treated alloy steel shaft provides strength against deflection and bending.
A durable silver powder-coated steel body provides corrosion resistance and a clean appearance. Nitrile rubber bushings add compliance while helping reduce unwanted noise, vibration, and harshness for street-driven trucks. Installation is bolt-on with no welding or fabrication required, although a spring compressor is necessary when transferring the factory spring and top hat.
Vehicle Fitment:
- 2015-2026 Ford F-150 2WD
- 2015-2026 Ford F-150 4WD
Please Note:
- Not compatible with Ford F-150 Raptor or F-150 Lightning models.
- Installation requires a spring compressor when transferring the factory spring and top hat.
- When reusing the factory Ford upper control arm, Headlight Sensor Bracket Kit #12299506 and Payload Capacity Sensor #12299507 are required.
- When using a Ridetech upper control arm, Headlight Sensor Bracket Kit #12299501 is required for trucks with two height sensors on the driver side. Kit #12299502 is required for trucks equipped with four headlight sensors, including pickups with the onboard scale option.
- When reusing the factory Ford upper control arm, the lower control arm bolt hole must be slotted 1/2" inboard toward the engine as specified in the installation instructions.
- Ridetech optional upper control arms can be used to avoid slotting the lower control arm bolt hole.
- For front ride height reductions greater than 3", slotting the lower control arm bolt holes alone is not sufficient to achieve proper alignment. Ridetech tubular upper control arms are required.
California Residents: Proposition 65 Warning
Related Categories: F-150 Suspension













