Headlight Wiring Harness From Firewall 1969
Headlight Wiring Harness From Firewall 1969 is rated out of 5 by 2.
- Made In The USA
- Correct Color Coded Wiring
- Plug And Play
- Sold Individually
You save 6%
This product will fit the following Mustang years:
Rated 1 out of 5 by 69Mahala from Almost Perfect I was ready to brag on this one but by virtue of my battery boiling over found out that the long slender connector that goes to the voltage regulator had F and I connections reversed. Basically the "field" connection wire from the alternator was not going to the correct contact on the voltage regulator so while running I was putting 18+vdc on my battery vs 14vdc. Battery did not like it. I did not like it when what I thought was water was actually battery acid all over around the battery and dripping down on my frame rail and suspension components. Also did not like the brand new Optima Red Top getting overheated. Took about 2 minutes to correct after I found the problem but has caused some issues. Lesson learned for me.
Date published: 2016-11-23
Rated 5 out of 5 by anbo from High quality replica of the original Very happy with this purchase. It is a high quality exact replica of the original harness. Would have been nice if it came already wired up to a firewall plug. You have to re-use your original and it's a little fiddly swapping it over. It comes with no instructions so you will probably need one of those colorized wiring diagrams so that you can figure out the mapping of the wires to the firewall plug. But overall a great quality product, as I have found with all of the stuff I have purchased from Alloy Metal Products.
Date published: 2018-03-30
Can I buy LED headlights and use this same wiring harness?
Date published: 2019-08-07
can I get the installation instructions e-mailed to me ? Thanks
Installation instructions are not available at this time.
Date published: 2019-08-03