Holley Electric Fuel Injection Fuel tank 400 LPH Kit Long Bed Chevrolet C10 1982-1987

Get the best parts for your EFI conversion, starting with this Electric Fuel Injection Fuel tank Kit (19-457) from Holley. This complete kit includes bolt-in components for your 1982-1987 Chevrolet C10 with a Long Bed, including a 400 lph fuel pump, internal baffling and a fuel level sender. The kit is capable of supporting 750 EFI (@ 60 PSI at 13.5 Volts / 10.4 AMP Draw). 

Features and Benefits: 
- Tanks are Coated Galvanized Steel then Powder Coated Silver 
- 400 Lph Fuel Pump with Hanger Assembly 
- Sender has 1/4-inch NPT Supply and Return Line Ports 
- Fuel Level Sender with Correct Ohm Range
- Fuel Pump and Sender are Recessed In Tank for Easy Install
- Fits and Looks Like OE Tank When Installed
- Complete Bolt-In Solution for EFI Conversion
- Measures 56" x 14-1/8" x 11"
- Includes New Tank Straps

The EFI Fuel Tank features coated galvanized steel with a silver powder-coated finish for great looks and total corrosion protection. It's equipped with an EFI-style tank baffling with a large 4.3-liter internal fuel tray to prevent fuel pump starvation. 

The corresponding fuel pump with hanger assembly provides the fuel you need with in-tank quietness. Both the fuel pump and fuel level sender are recessed in the tank for an easy installation process, minus any modifications to your truck. The sender also has 1/4-inch NPT Supply and Return line ports for easy fuel line connection and a barbed vent fitting. The fuel level sender features the correct Ohm range to ensure compatibility with your factory gauges. 

Tech Tip: Using the GM design, these tanks will fit on either side of the truck. For a better seal, use Permatex Indian Head Gasket Shellac Compound or Aviation Form-A-Gasket sealant on the gasket and screws.