Holley Fuel Tank Kit Under Bed Chevrolet C10 1967-1972

With the Holley Under Bed Fuel Tank Kit (19-185), you'll benefit from versatile mounting configurations and a system that can support up to 550 EFI (@ 60 PSI at 13.5 Volts/10.4 AMP Draw). The Fuel Tank features an 18-gallon capacity and will mount beneath the bed of your 1967-1972 Chevrolet C10 using the flanges to bolt in place.

While the tank is designed to bolt up to the bottom side of the frame rails, it can also be mounted on top of, or even in-between, the rails. The customer is responsible for drilling and locating the ideal mounting holes. The fuel filler neck will go up through the bed floor. 

Features and Benefits: 
- Tanks are Coated Galvanized Steel then Powder Coated Silver 
- 255 lph Fuel Pump with Hanger Assembly 
- Sender has 1/4-inch NPT Supply and Return Line Ports 
- Fuel Level Sender with Correct Ohm Range
- Measures 32-1/4" x 20-1/2" x 9-3/4" (with Mounting Flange)

The Bed Fuel Tank Kit comes with the tank, a 255 lph fuel pump, internal baffling and a fuel level sender. The tank is powder-coated silver for a long lifespan of good looks and corrosion resistance. 

The corresponding fuel pump with hanger assembly provides the fuel you need with in-tank quietness. The sender has 1/4-inch NPT Supply and Return line ports for easy fuel line connection and a barbed vent fitting. The fuel level sender features the correct Ohm range to ensure compatibility with your factory gauges. 

The Fuel Tank measures 32-1/4" x 20-1/2" x 9-3/4" (including the mounting flange) and 28" x 20-1/2" x 9-3/4" (measured without the mounting flange).

*Mounting hardware is not included.

Tech Tip: To mount the fuel filler on the bedside, purchase the optional Side Fill Kit (FFP33).

Please Note: The customer must drill and locate the mounting holes for installation.