ICON Vehicle Dynamics Stage 2 Suspension System Billet 4-Wheel Drive F-150 2009-2013

Reach the heights of an aggressive wheel and tire combo with the damping performance to back up your 2009-2013 F-150 via ICON Vehicle Dynamics’ Stage 2 Billet Suspension System! To foster fluid ride quality, this system’s 2.0 Aluminum series rear shocks are tuned and valved to your 4-wheel drive. Internal reservoirs lie within their 5/8” nitro steel shafts, providing brisk cooling and exceptional durability. Add in the corrosion-resistant coilovers with 7/8” shafts and users see an overhaul in vehicle control on top of wheel travel. Plus, you get 0” to 2.63” in lift adjustability!

Features and Benefits:
- 2.0 Aluminum series rear shocks w/ internal reservoirs
- Shock bodies have 5/8” polished, nitro steel shaft
- Vehicle-specific tuning & valving enhances front-to-rear balance
- Stellar damping & vehicle control on/off-road
- Boosts wheel travel, refines ride quality, & retains towing capacity
- Corrosion-resistant, CAD-plated, coilovers w/ 7/8” shaft
- Coilovers bear adjustable lift height of 0” to 2.63”
- Billet aluminum UCAs boost strength & retain OEM alignment spec range
- UCAs feature heavy-duty, high-angle Delta Joint
- Delta Joint is zinc-plated & uses tough grease seal
- Components CNC-machined from 6061 aircraft-grade aluminum
- FK rod end bearings boost longevity & minimize deflection
- Bolt-on installation w/o cutting/welding

This system preserves the factory alignment spec range by using strength-reinforcing, billet aluminum upper control arms. They bear increased caster over the OEM iteration and are aided by a heavy-duty, high-angle Delta Joint. Together, they offer articulation with little bind while the joint’s tough grease seal helps it shut out dirt for lasting operation. Complete with FK rod end bearings for reduced deflection, this system gives F-150s the ultimate in handling without sacrificing towing capacity.

Vehicle Fitment:
- 2009-2013 Ford F-150
- For 4-wheel drive applications ONLY

Additional Notes:
- OEM wheels & tires fitment: not compatible with all available OE wheel/tire combinations. Aftermarket wheels with lower offset/less backspace are recommended.
- Recommended aftermarket wheels: 17x8.5" w/ 5” backspace / 6mm offset
- Recommended aftermarket wheels: 18x9" w/ 5.25" backspace / 6mm offset
- Recommended aftermarket wheels: 20x9" w/ 5.625" backspace / 16mm offset
- Recommended aftermarket tires: 33" x 11.50"
- Larger tires may fit but fender trimming and modifications will be required.
- Shocks are fully serviceable. Coilover heights indicated are for a stock-equipped vehicle.