ICON Vehicle Dynamics V.S. 2.5 Series Coilover Kit Remote Reservoir Front/Rear Bronco 2021-2024
Highlights
- Front & Rear Coilovers
- Increased Wheel Travel
- Upgraded Ride Quality
- 100% Bolt-On Installation
ICON Vehicle Dynamics V.S. 2.5 Series Front and Rear Remote Reservoir Coilover Kit for 2021, 2022, 2023, and 2024 Broncos.
Transform the ride quality of your 2021-2024 Bronco with the 2.5 Series V.S. Front Rear Coilover Kit from ICON Vehicle Dynamics. This Coilover Kit is designed to increase front and rear wheel travel, allowing you to utilize larger and more aggressive wheel and tire combinations for improved off-road performance. Each coilover shock features a remote reservoir which means a higher volume of shock oil, ensuring cooler operating temperatures under hard driving. Vehicle-specific shock length and valving in each 2.5” shock body allows for maximum shock travel for superior ride quality and suspension performance on- and off-road.
Features & Benefits:
- Complete Front & Rear Coilover Kit
- Increases Front Wheel Travel up to 11.5” Over Stock
- Increases Rear Wheel Travel up to 14” Over Stock
- Improved Ride Quality & Handling Performance
- Tuned for Vehicle-Specific Shock Damping & Control
- Remote Reservoirs Maintain Cool Operating Temps During Heavy Use
- Models with Sasquatch Package Receive 2-3” Front Lift & 1.25-2.25” Rear Lift
- Models without Sasquatch Package Receive 3-4” Front Lift & 2-3” Rear Lift
- ICON-Engineered Triple-Rate Coil Springs
- CNC-Machined 6061 Aircraft-Grade Aluminum Components
- FK Rod End Bearings Minimize Deflections & Extend Longevity
- Fully Rebuildable & Re-Tunable Design
- 100% Bolt-On Installation, No Cutting or Drilling
- High-Strength Allow CNC-Machined Lower Bar Pin
- Made in the USA
Tech Info:
- OEM Wheels & Tires Fitment (with Sasquatch Package): Yes
- OEM Wheels & Tires Fitment (without Sasquatch Package): No
- Recommended Aftermarket Wheels (with Sasquatch Package): 17x8.5” with 4.75” Backspace / 0mm Offset
- Recommended Aftermarket Wheels (with Sasquatch Package): 18x9” with 5.00” Backspace / 0mm Offset
- Recommended Aftermarket Wheels (with Sasquatch Package): 20x9” with 5.00” Backspace / 0mm Offset
- Recommended Aftermarket Wheels (without Sasquatch Package): 17.8.5” with 5.75” Backspace / 25mm Offset
- Recommended Aftermarket Wheels (without Sasquatch Package): 18x9 with 6.00mm Backspace / 25mm Offset
- Recommended Aftermarket Tires (with Sasquatch Package): 35” x 12.50” (37” Tires Require Coilover Bump Stop Spacers & Minor Trimming)
- Recommended Aftermarket Tires (without Sasquatch Package): 35” x 12.50” (Recommend High-clearance Crash Bars. 37” Tires Require Coilover Bump Stop Spacers & Minor Trimming & Modifications)
- Factory Upper Control Arms will NOT Align Properly Past 2.5” of Lift. Above 2.5” of Lift, an Aftermarket UCA is Recommended
- When Running 37” Tires, Crash Bar Removal May Be Required but NOT Recommended
- Fitment Testing Done on ICON & OE Steering Components; Due to Tight Clearances to Front Coilovers, Certain Aftermarket Steering Components May Not be Compatible
- Bronco Everglades will Have Lift Height Range of 1.5-2.5” Over Stock
- Triple-Rate Coils Are Optimized for Improved Suspension Performance & Ride Quality on Near-Stock Weight Broncos; Softer Initial Spring Rates Net Lower-Than-Advertised Ride Heights as Weight is Added to Vehicle’s Rear
- Advertised Lift Height Ranges for 4-Door Models; 2-Door Models will Net Approximately .5” of Additional Lift Over Stock
Vehicle Fitment:
- 2021-2024 Ford Broncos
* NOT Compatible with Bronco Raptor
California Residents: Proposition 65 Warning
Related Categories: Ford Bronco Parts, Bronco Suspension, Bronco Shocks, Bronco Lift Kits
Installation Difficulty
Intermediate skill is required for this installation.