ICON Vehicle Dynamics V.S. 2.5 Series Coilover Kit Remote Reservoir With CDEV Front/Rear Bronco 2021-2024

Equipping your 2021-2024 Bronco with the V.S. 2.5 Series Front and Rear Coilover Kit from ICON Vehicle Dynamics is a surefire way to drastically improve your ride and suspension quality. This kit is designed to accommodate for larger and more aggressive wheel and tire combinations by providing increased wheel travel over stock, with 11.5” of additional travel in the front and 14” in the rear. While your new wheels allow you to tackle rough terrain with ease, remote shock reservoirs ensure that temperatures stay cool, preventing damping fade under hard use and providing sustained performance.

Features & Benefits:
- Complete Front & Rear Coilover Kit
- Increases Front Wheel Travel up to 11.5” Over Stock
- Increases Rear Wheel Travel up to 14” Over Stock
- Improved Ride Quality & Handling Performance
- Tuned for Vehicle-Specific Shock Damping & Control
- Remote Reservoirs Maintain Cool Operating Temps During Heavy Use
- Models with Sasquatch Package Receive 2-3” Front Lift & 1.25-2.25” Rear Lift
- Models without Sasquatch Package Receive 3-4” Front Lift & 2-3” Rear Lift
- ICON’s Compression Damping Electronic Valves (CDEV)
- CDEV Allows for On-Vehicle Damping Adjustment
- ICON’s Intelligent Control (IIC)
- IIC Onboard G-Force Monitoring for Instant Damping Adjustments
- ICON-Engineered Triple-Rate Coil Springs
- CNC-Machined 6061 Aircraft-Grade Aluminum Components
- FK Rod End Bearings Minimize Deflections & Extend Longevity
- Fully Rebuildable & Re-Tunable Design
- 100% Bolt-On Installation, No Cutting or Drilling
- High-Strength Allow CNC-Machined Lower Bar Pin
- Made in the USA

The V.S. 2.5 Series Coilovers utilize vehicle-specific shock lengths to provide a tailored suspension performance just for 2021-2024 Broncos. ICON’s exclusive Compression Damping Electronic Valves, or CDEV, allow for precision electronic shock tuning in an instant. This means superior on- and off-road suspension quality with hassle-free adjustments. ICON Intelligent Control (IIC) reads the terrain for on-the-fly adjustments of via the CDEV on each individual shock.

Tech Info:
- OEM Wheels & Tires Fitment (with Sasquatch Package): Yes
- OEM Wheels & Tires Fitment (without Sasquatch Package): No
- Recommended Aftermarket Wheels (with Sasquatch Package): 17x8.5” with 4.75” Backspace / 0mm Offset
- Recommended Aftermarket Wheels (with Sasquatch Package): 18x9” with 5.00” Backspace / 0mm Offset
- Recommended Aftermarket Wheels (with Sasquatch Package): 20x9” with 5.00” Backspace / 0mm Offset
- Recommended Aftermarket Wheels (without Sasquatch Package): 17.8.5” with 5.75” Backspace / 25mm Offset
- Recommended Aftermarket Wheels (without Sasquatch Package): 18x9 with 6.00mm Backspace / 25mm Offset
- Recommended Aftermarket Tires (with Sasquatch Package): 35” x 12.50” (37” Tires Require Coilover Bump Stop Spacers & Minor Trimming)
- Recommended Aftermarket Tires (without Sasquatch Package): 35” x 12.50” (Recommend High-clearance Crash Bars. 37” Tires Require Coilover Bump Stop Spacers & Minor Trimming & Modifications)
- Factory Upper Control Arms will NOT Align Properly Past 2.5” of Lift. Above 2.5” of Lift, an Aftermarket UCA is Recommended
- When Running 37” Tires, Crash Bar Removal May Be Required but NOT Recommended
- Fitment Testing Done on ICON & OE Steering Components; Due to Tight Clearances to Front Coilovers, Certain Aftermarket Steering Components May Not be Compatible
- Bronco Everglades will Have Lift Height Range of 1.5-2.5” Over Stock
- Triple-Rate Coils Are Optimized for Improved Suspension Performance & Ride Quality on Near-Stock Weight Broncos; Softer Initial Spring Rates Net Lower-Than-Advertised Ride Heights as Weight is Added to Vehicle’s Rear
- Advertised Lift Height Ranges for 4-Door Models; 2-Door Models will Net Approximately .5” of Additional Lift Over Stock

Vehicle Fitment:
- 2021-2024 Ford Broncos
* NOT Compatible with Bronco Raptor