Intake Manifold Fabricated Aluminum Satin LS1/LS2/LS6 Engine With Cathedral Ports
Highlights
- 102MM Throttle Body Opening
- Satin Finish
- Maximize HP and Torque
- Includes Necessary Hardware
Satin Fabricated Aluminum Intake Manifold for LS1, LS2, and LS6 Engines with Cathedral Ports.
Do you need to maximize the horsepower and torque in your classic Chevrolet C10 or C/K? Does your truck use an LS1, LS2, or LS6 engine with cathedral ports? If yes, then today is your lucky day! Check out this Satin Fabricated Aluminum Intake Manifold from CJ Pony Parts!
Features and Benefits:
- Satin finish
- T-6061 aluminum construction
- 102mm throttle body opening
- Includes necessary hardware for installation
This Fabricated Aluminum Intake Manifold is for use with LS1/LS2/LS6 Chevrolet engines with cathedral ports. The intake features a T-6061 aluminum construction and receives a 102MM throttle body. These intakes will deliver maximum horsepower and torque by boosting velocity and distributing airflow to all the cylinders. It includes a vacuum fitting, throttle body O-ring, runner gaskets, lock washers, and required bolts for installation. Order yours today!
Dimensions:
- Front Height: 7.250”
- Rear Height: 7.500”
- Intake runner: 1.750”x2.150”x4”
- Throttle body opening: 102MM
California Residents: Proposition 65 Warning
Related Categories: Chevrolet C10 Parts, C10 Restomod, C10 Engine, C10 LS Engine Swap Parts, C10 Intake Manifolds
Only for use on pre-pollution controlled vehicles: This product can be used on vehicles that were manufactured before emissions control regulations were imposed. Pre-pollution vehicles are defined as:
- 1965 and older U.S. manufactured California certified vehicles
- 1967 and older U.S. manufactured federally certified vehicles
