Interior Kit With Full Floor Cut Pile Mass Back Carpet With Two Fuel Tanks Bronco 1968-1976

CJ's Part Number:
Only %1 left

Interior Kit with Full Floor Cut Pile Carpet with Mass Backing for all 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975 and 1976 Broncos with Two Fuel Tanks.

For the 1968-1976 Ford Bronco owner wishing to restore their interior back to original condition comes this premium quality interior kit from CJ Pony Parts. You’ll be glad you purchased this kit with all of the great features that are included, such as: Factory style replacement upholstery and deluxe vinyl door panels, cut pile mass back carpet and much more!

When you order this interior kit, you will have the option to choose between a solid black or parchment colored finish. This choice of color will affect the finish of the upholstery, door panels, arm rest pads, quarter trim panels and sun visors in this kit. You will also have the option to choose the style of the kit’s door panels, whether you would like an all-vinyl design or for them to include woodgrain or mylar inserts.

Kit Includes:
- Full Set of Black or Parchment Seat Upholstery
- Pair of Front Bucket Seat Foam
- Rear Seat Foam
- ACC Black Full Floor Cut Pile Mass Back Carpet
- Pair of Black or Parchment Deluxe Vinyl Door Panels
- Set of Door Panel Clips (2)
- Pair of Door Watershields
- Pair of Black or Parchment Interior Quarter Trim Panels
- Pair of Black or Parchment Sun Visors
- Dashes Direct Black Vinyl Dash Pad
- Black or Parchment Driver and Passenger Side Arm Rest Pads

When you make this purchase, you'll receive new upholstery that will replace the old and worn upholstery for your front and rear seating. Made with original Sierra grain vinyl, the upholstery includes the popular Sierra inserts within its layout. It comes with the original sewing patterns, sewn together using the same six stitches-per-inch sewing pattern. Combined with the replacement seat foam, this will help make for a more comfortable ride in your classic Bronco.

The seat foam includes a pair to cover the driver and passenger side front buckets, along with full seat foam for your rear bench seating. Each seat foam features a two-piece design that includes a piece for your seat back and another for your seat bottom. The front bucket seat foam also incorporates a low back design. They will not only easily replace you old seat foam but also restore your seats to their proper shape and density.

Possibly the most important aspect of this kit is the ACC cut pile carpet with mass backing, which includes 2-piece wheel well carpet, 1-piece passenger area carpet, tailgate carpet and rear cargo area carpet. This carpet is made specifically for Broncos with two fuel tanks. Produced using ACC's premium nylon cut pile material, this carpet design has been precision heat molded for a perfect fit in your Bronco. Cut pile carpet is comparable to what is found in most domestic vehicles since 1974. The cut pile material provides more of a plush feel compared to the original 80/20 loop carpet. It is then dyed black using the finest dyes available and tested for ozone humidity fading & light fastness. The underside of the carpet features heavy 36 ounce jute padding for insulation. The exposed edges of the carpet features vinyl binding and a heel pad is also present for added wear resistance.

Mass back is a tough, rubber layer between the carpet and the jute insulation that increases the form and rigidity of the carpet, while decreasing road noise. At 40mils thick, it virtually eliminates the need for Dynamat or any other type of additional sound deadener. Mass back carpet will fit just like the original carpet once it is installed, but increases moldability, sound deadening and insulation. Mass back carpet retains shape much better than a standard poly backed carpet making for a much easier installation.

Continuing to restore your classic Bronco's interior, the pair of door panels are high-quality reproductions of the originals that also come with your choice of the correct woodgrain or mylar trim inserts. Also available is an all-vinyl design if you desire. Made using the same original Sierra grain vinyl material, each door panel includes the correct dielectric "heat seal" stitching pattern. These door panels are also very reliable as they feature a poly-coated "autoboard" backing that is .1-inch in thickness. Their backing has its perimeter stapled for maximum adhesion to last plenty of years to come in your classic Bronco's interior.

To make sure these door panels are properly installed, this kit will also come with two sets of fifteen door panels clips that will securely hold each panel in place. Each metal spring clip has a direct push-in design for an easy install. To keep the door panels protected, you'll also receive a pair of door watershields. Each watershield is an OE reproduction that will fit right in-between your door panel and the outer body. Once installed, they will protect your new door panels from any moisture, dirt & dust from getting through and causing potential damage.

Also included is a pair of interior quarter trim panels as well as a pair of sun visors. The quarter trim panels are manufactured from original Sierra grain vinyl with the correct dielectrically heat sealed vertical patterns. Using an interference fitment at the top, these panels will cover your hard top mounting bolts for a more finished look. The sun visors are made with original grain vinyl as well and come with the vinyl binding stitching just like the originals.

Rounding out this kit is a pair of arm rests and a Dashes Direct dash pad. Each arm rest comes with a factory black or parchment finish and will easily mount on the driver and passenger side door panel. The dash pad comes from Dashes Direct and is made with a durable vinyl construction and black finish. It will mount into place with ease.

*The included carpet is specific for Broncos with two fuel tanks ONLY.

*The front floor carpet does NOT come with pre-cut holes which will allow you to make any necessary cuts only where needed for various interior components.

Tech Tip: When you first take your new carpet out of the box, you may notice quite a few wrinkles. This is normal. We recommend laying the carpet out in the sun for a few hours to help soften the jute backing along with reducing the amount of wrinkles that are visible prior to installation.

*Watershield adhesive will be required to properly mount the door watershields into place.

Warning: The quarter trim panels in this kit are designed to be used with your Bronco's hard top on. Using these panels without the top on will require some modifications.

The sun visors do NOT come with mounting rods however CJ Pony Parts does offer them for your classic Bronco.

Please Note: The arm rests do NOT come with mounting screws.

Order an Interior Kit with Full Floor Cut Pile Mass Back Carpet for your 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975 or 1976 Bronco with Two Fuel Tanks from CJ Pony Parts today!

Vehicle Fitment

This product will fit the following Bronco years:

Only registered users can ask/answer questions. Please sign in or create an account.
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account
Complete Your Package
Add to Cart