LEED Brakes Manual Front Disc Brake Conversion Kit Bronco 1966-1975
Highlights
- 12" Diameter Rotor
- (2) Zinc-Plated Calipers
- Cast Iron Rotor/Calipers
- Includes Master Cylinder
LEED Brakes Manual Front Disc Brake Conversion Kit for 1966, 1967, 168, 1969, 1970, 1971, 1972, 1973, 1974, and 1975 Broncos.
Make the switch to disc brakes in your 1966-1975 Bronco with the help of this LEED Brakes Manual Front Disc Brake Conversion Kit (FC5001-405)! With this high-quality and precision-machined kit, you get everything needed to mount dual piston disc brakes to stock drum brake knuckles. It includes a 12” diameter rotor and two zinc-plated calipers, both built from cast iron to ensure reliable performance. Packaged alongside a master cylinder as well, it's a comprehensive kit that works with hubs and bearings in both stock and aftermarket setups. Plus, since it bolts on modification-free, no cutting, drilling, or grinding is required!
Features and Benefits:
- Drum to disc brake conversion kit
- 12” diameter, 1.032” thick rotor
- (2) zinc-plated calipers
- Rotor & spindles built from cast iron
- Includes master cylinder
- Works w/ stock/aftermarket locking hubs & bearings
- Bolts on w/o permanent modifications
Tech Tip: This kit is compatible with stock spindles.
Additional Notes:
- Does not include a brake booster or brake lines, both sold separately.
- A minimum of a 15” wheel diameter is recommended.
California Residents: Proposition 65 Warning
Related Categories: Ford Bronco Parts, Bronco Brakes, Bronco Disc Brakes, Bronco Restomod, Bronco Restomod Brakes
