Power Steering Pressure Hose Hydroboost To Rack 41-3/4" Mustang GT/Cobra 1998

Over time, the power steering pressure hose on your 1998 GT or Cobra Mustang will likely wear through. Make sure to replace it with a high-quality part like this 41-3/4" power steering hydroboost to rack pressure hose. This hose will directly replace your Mustang's factory hose and ensure the connection between your power steering hydroboost and rack is running smoothly.

Features and Benefits:
- Connects the hydroboost to power steering rack
- 1,500psi pulse pressure rated
- 8,900psi burst pressure rated
- End 1 - 16mm swivel type 3 o-ring
- End 2 - Long swivel o-ring
- Highly resistant to issues from oil, heat and ozone

This power steering pressure hose is 41-3/4" in length and is manufactured from double piles of high tensile strength braided fabric. As a direct factory replacement, this hose will correctly link your hydroboost and your power steering rack using a pair of o-rings. On one end of the hose is a 16mm swivel type 3 o-ring that will connect to you hydroboost, while the other end connects to your power steering rack with a long swivel o-ring.

The tubing of this hose is pro-coated and the fittings are zinc-chromate plated for corrosion resistance. The overall design of this pressure hose allows it to be resistant to many issues caused by heat, oil or ozone. In fact, this hose can withstand an oil temperature of up to 300 degrees Fahrenheit. Once installed, this replacement hose will resist a bursting pressure up to 8,900 psi and a pulsating pressure up to 1,500 psi.