Power Steering Pressure Hose From Pump To Hydroboost 59-1/2" Mustang Mach 1/ Cobra 2003-2004

CJ's Part Number:
PSHP54

Highlights

  • Direct OE Replacement
  • Corrosion Resistant
  • Terne-Coated Tubing
  • 8,900PSI Burst Rated
$72.49

Power Steering 59-1/2" Pump to Hydroboost Pressure Hose for 2003-2004 Mach 1 and Cobra Mustangs.

If you've run into some issues with your power steering, there's a good chance that you may have worn-out or leaky power steering hoses. If you notice this in your 2003-2004 Mach 1 or Cobra Mustang, install this 59-1/2" Power Steering Pump to Hydroboost Pressure Hose. It is a direct replacement for the original that connects the power steering pump to your hydroboost.

Features and Benefits:
- Connects the Power Steering Pump to Hydroboost
- End 1 - 16mm Swivel O-Ring
- End 2 - 16mm Swivel O-Ring
- 1,500psi Pulse Pressure Rated
- 8,900psi Burst Pressure Rated
- Highly Resistant to Issues from Oil, Heat and Ozone
- Withstands Internal Oil Temperatures up to 300 Degrees Fahrenheit
- Fittings are Zinc-Chromate Plated

This power steering pressure hose will connect your power steering pump to your hydroboost and will act as a direct OE replacement for your worn-out or leaky original. Crafted from double piles of high tensile strength braided fabric, this hose is resistant to pulsating pressure up to 1,500 psi as well as bursting pressure up to 8,900 psi. Measuring 59.5 inches in length, this hose will connect to the pump and hydroboost through a 16mm swivel o-ring on each end of the hose.

This pressure hose has tubing that is terne-coated along with fittings that are zinc-chromate plated, resulting in a final product that is rust-resistant over time. It is also highly resistant to issues that may come from excess oil, high temperatures or ozone. It can withstand internal oil temperatures up to 300 degrees Fahrenheit, making for a smart investment to your Mach 1 or Cobra Mustang.

Please Note: If you own a 2003 4.6L 4V Engine, please verify the fitting size before you purchase this Power Steering Pressure Hose. If you have 16mm and 18mm fittings, purchase PSHP58.

California Residents: Proposition 65 Warning

Installation Videos

Vehicle Fitment

This product will fit the following Mustang years:

Only registered users can ask/answer questions. Please sign in or create an account.
Write Your Own Review
Only registered users can write reviews. Please sign in or create an account.