Rancho Suspension System 3" Ford F-150 4WD 2014-2020
Highlights
- Pre-Installed Ball Joint
- Zerk Fittings = Easy & Quiet
- Fits Up To 35" Tires
- 100% Bolt-On Design
Rancho 3" Suspension System for all 2014, 2015, 2016, 2017, 2018, 2019 and 2020 4WD Ford F-150s.
Does your 2014-2020 Ford F-150 with 4WD need a bit of a boost in its performance? If you want to find a way to improve your truck’s ride quality while also clearing up to 35” tires, look no further than this Rancho 3" Suspension System (RS66507R9) from CJ Pony Parts! This easy-to-install suspension system will increase your truck’s durability instantly.
Features and Benefits:
- Fits up to 35-in. tires
- 100-percent bolt-on system
- Rancho designed upper control arms
- Zerk joints added to pivots
- Rancho Level It RS9000 XL Struts and Rear
- RS9000 XL Shocks included
- Rear blocks and U-Bolts included
- Will not affect the Electronic Stability Control System
- Maintains O.E. alignment specs
- Brackets are constructed from high-strength low-alloy steel
- Includes 2 upper ball joints
This 3" Suspension System (RS66507R9) built by Rancho is designed to effectively maintain the ball joint in its normal operating range, as well as provide additional wheel travel and caster to aid in alignment compared to factory control arms on lifted applications. In your new suspension system, you will find urethane control arm pivot bushings and a replaceable ball joint that is pre-installed for your convenience. Zerk fittings allow for each control arm maintenance and a whisper quiet operation.
This suspension system (RS66507R9) is comprised of many high quality pieces that provide excellent on-road comfort and off-road performance. Such pieces include the renowned “Level It” Rancho RS9000 XL 9-position adjustable series Leveling Struts (see note below) with rear shocks, two sway bar spacers, and required mounting hardware. The sway bar spacers control the roll and sway of your truck by correcting end link angles.
This kit (RS66507R9) was designed with 35” tires (see note below) and will lift the front end of your pick-up by three (3) inches. It will also allow the reuse of OE wheels and tires. Included are Racho rear blocks so you can raise the rear of your F-150 an additional 1.5 inches, leveling out the whole truck. The kit also includes everything you need to complete the 100% bolt-on installation, including a Limited Lifetime Warranty and a 90-Day Free Ride Offer.
Please Note: Must use OE springs and top mounting components. Trimming or modification required to provide proper clearance for the 35” development wheel and tire. Actual tire size varies between manufacturers.
California Residents: Proposition 65 Warning
Related Categories: Ford F-150 Parts, F-150 Suspension, F-150 Lift Kits