ReadyLift Lift Kit 6" Without Shocks TRD Pro Toyota Tundra 2015-2018
ReadyLIFT 6" Lift Kit without Shocks for 2015, 2016, 2017 and 2018 TRD Pro Toyota Tundras.
If you want to really make your 2015-2018 TRD Pro Toyota Tundra into an aggressive machine, than start the process and order this ReadyLIFT 6" Lift Kit without Shocks (44-5860) from CJ Pony Parts today!
ReadyLIFT 6" Lift Kit Features:
- Designed exclusively for 2015-2018 Tundra TRD Pro models with Bilstein coilover shocks
- Complete system allows for up to 35” tires and wheels
- Lifts your Tundra up to 6” and increases ground clearance by 2”
- Maintains factory suspension geometry
- Retains factory tie rods
- Innovative offset spacer design attach to factory strut to maintain factory ride and feel
- Does not increase track width
- Able to run factory OE 20” wheels or upgrade up to 35” tires
- CNC bent boxed subframe drop assemblies
- Cast iron rear lift blocks
- Longer u-bolts and hardware
- Bump stop extensions
- Sway bar frame mount brackets
- Made in the U.S.A.
*ReadyLIFT recommends 35" tires as the maximum on a 9" wheel with a +25 offset for the least chance of rubbing (front mud flaps may need to be removed).
This complete lit kit from ReadyLIFT was designed specifically for your TRD Pro Tundra equipped with Bilstein coilover shocks. Your truck is special enough as it is, but why not modify it to allow for upgraded, more aggressive wheels and tires? You'll lift your Toyota up by 6" and will gain an additional 2" of ground clearance after you get this complete kit installed. Don't forget to get a pro alignment to be sure your new tires wear evenly after install. What are you waiting for? Begin your truck's mods and order this 6" lift kit today from CJ's!
Wheel and Tire Note: This system will only work with factory 20" wheels--it will not work with factory 18" wheels, but aftermarket wheels may be okay.
Vehicle Fitment Note: This kit is intended for 2015-2018 TRD Pro Tundras equipped with Bilstein coilover shocks only.
Please Note: Professional installation can take anywhere from 6 to 10 hours. A professional alignment is required to ensure proper tire wear after install.
Pick up this ReadyLIFT (44-5860) 6" Lift Kit without Shocks for your 2015, 2016, 2017 or 2018 TRD Pro Toyota Tundra today from CJ Pony Parts!
California Residents: Proposition 65 Warning
Installation Difficulty

Advanced skill is required for this installation.






