Rough Country 3” Lift Kit W/M1 Loaded Struts/Rear M1 Shocks 4-Wheel Drive F-150 2009-2013

With this Rough Country 3” Lift Kit with M1 Loaded Struts and Rear M1 Shocks (54440), your 2009-2013 4-Wheel Drive F-150’s journeys will reach new heights! This lift kit levels the front and rear of your F-150 by 3” and features forged aluminum upper control arms with clevite rubber bushings that grant this kit lasting durability. Said arms minimize ball joint wear and tear by keeping them at the optimum angles for reduced stress while also allowing them an improved range of motion. As far as installation goes, it’s no sweat because the lift kit has a seamless bolt-on installation that’s drill-free. However, if you ever decide you want to switch back to your stock design, this kit is designed to help you do just that hassle-free.

Features and Benefits:
- Aluminum Forged Upper Control Arms
- Includes Clevite Rubber Bushings
- Ball Joints Remain at Optimum Angles
- Reduced Wear & Tear
- Option to Return to Stock
- No-Drill, Bolt-On Installation
- Made in the USA

Along with the lift kit, you get M1 loaded struts and rear shocks that maintain smooth ride quality via their 46mm digressive monotube piston design and deflective-disc independent rebound and compression, both of which help your F-150 speedily adapt to uneven road conditions. Durability-wise, the 2” seamless extruded tubing and 18mm center-ground, case-hardened, chromed, and super-polished rod of the loaded struts grant them the toughness you need for your off-road treks. Topped with zinc plating for elemental resistance, these M1 loaded struts and the lift kit as a whole give you full command of the road on your future off-road outings.

Features and Benefits:
- M1 Loaded Struts/Rear Shocks
- 46mm Digressive Monotube Piston
- Self-Adjusting, Deflective-Disc Independent Rebound & Compression
- 2” Seamless Extruded Tube
- 18mm Centerless-Ground, Case-Hardened, Chromed, & Super-Polished Rod
- Zinc-Plated for Elemental Resistance

Please Note:
- This kit does NOT fit standard cab models
- This kit works with tires up to 34” in height
- This kit does not work with models with a stock ride height over 22”

Tech Tip
- You can use your factory tires with this kit if you use Rough Country’s 0.25” Wheel Spacer, sold separately.