Rugged Ridge Dual A-Pillar Light Kit Semi-Gloss Black With Four 3" Square LED Lights Jeep Wrangler JK 2007-2018

Rugged Ridge:
11232.33
MSRP $411.00
$399.99
You save $11.01
Earn
points.

Rugged Ridge Semi-Gloss Black Dual A-Pillar Light Kit with Four 3" Square LED Lights for 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017 and 2018 Jeep JK Wranglers.

Hit the trails in style and increase visibility while driving your 2007-2018 Jeep JK Wrangler at night with this Semi-Gloss Black Dual A-Pillar Light Kit with Four 3" Square LED Lights from Rugged Ridge. This kit allows you to mount two LED lights to each side of your JK Jeep's A-pillars.

LED Light Kit Includes:
- Two semi-gloss black windshield mounting brackets
- Four 3" 16-watt square LED lights

This semi-gloss black A-pillar light mount kit from Rugged Ridge includes a pair of light mounts and four 3" cube LED lights. Each bracket holds two lights. Crafted from heavy-duty steel, the new brackets are easily mounted to the lower windshield mount using your JK's existing mounting bolt holes. There is no drilling or cutting required for installation!

Features and Benefits of the Rugged Ridge Semi-Gloss Black Dual A-Pillar Light Kit with Four 3" Square LED Lights (11232.33):
- Brackets are made out of heavy-duty steel
- Stylish semi-gloss black finish
- Waterproof
- Driving beam pattern
- Combined 3360 lumens of light
- Rugged Ridge logo in white on bottom of lights
- Uses existing mounting bolt holes
- No drilling or cutting required
- Simple installation

The LED light bars from Rugged Ridge included in this kit are engineered and tested to optimize your adventure by effectively illuminating the area around you. The LED lights are vibration, corrosion and submersion tested for optimal performance. Each bright waterproof 3" 16-watt square LED light has a driving beam pattern and puts out 840 lumens of light. The CREE diodes have a 30,000-hour lifespan!

Fitment:
2007-2018 Jeep JK Wrangler
2007-2018 Jeep JK Wrangler Unlimited

*Wiring harnesses are sold separately.

Rugged Ridge manufactures Jeep parts and accessories for the growing Jeep and off-road enthusiast market. Rugged Ridge has designed and crafted thousands of products for the Jeep market and continues to develop hundreds of additional Jeep accessories each year.

Order Rugged Ridge's 11232.33 Semi-Gloss Black Dual A-Pillar Light Kit with Four 3" Square LED Lights for your 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017 or 2018 Jeep JK Wrangler from CJ Pony Parts today!

California Residents: Proposition 65 Warning

Installation Difficulty

Easy
Easy

Novice skill is required for this installation.

Installation Videos

Video Transcript

When going off-roading, you can never have too much visibility, and as you can see with our 2016 Jeep Wrangler, we've installed a ton of LED upgrades, but that's just not enough. Today, we're going to take it a step further by installing a Rugged Ridge Windshield dual light kit.

This kit comes with heavy duty brackets made of heavy duty steel with your choice of a textured black or gloss black finish with four cube LEDs that will really help when we're off road and today we're going to install it on our 2016 Jeep Wrangler.

For this installation you'll need a three H ratchet, 13 millimeter socket, T40 torques bit, T30 torques bit and a pair of cutters, crimpers and strippers.

The installation of these brackets is very simple. Grab yourself a T40 torques bit and remove these four bolts.

Install the mount. These are side specific. So make sure you grab the right one.

Then reinstall the bolts.

And repeat the process on the other side.

We have both brackets mounted but now to run the wires into the engine department to where our relay box is, we're going to remove the cal and run the wires under there.

Remove the four T30 torque screws on the cal.

Grab your cube light and stick a bolt through the bracket. Install it on the mount.

Stick your finger on top of the bolt and install the lock washer and nuts.

Tighten it up with a 13 millimeter wrench.

And repeat the process for the other three lights.

Plug in the pigtails.

Then run the wiring underneath the cal to get into the hood.

We have an aftermarket trail rocker kit that we're going to hook our lights up to, but you can hook yours up any way you would like.

Reinstall the screws on the cal.

And your installation is finished.

Here we are about 15 feet away from our wall and as you can see these lights are extremely bright. The only lights that are on are just the four cubes. They're really going to help out when we're off road.

The brackets are also available in gloss black and here's what they look like.

Our rugged ridge windshield lights are installed and they look absolutely killer on our jeep. I love the way they look. And they're incredibly bright. They're really going to help when we're off road. Installation is going to take you about an hour and before you know it you'll be heading off road.

Vehicle Fitment

This product will fit the following Wrangler years:

  • 2007,
  • 2008,
  • 2009,
  • 2010,
  • 2011,
  • 2012,
  • 2013,
  • 2014,
  • 2015,
  • 2016,
  • 2017,
  • 2018,
Only registered users can ask/answer questions. Please sign in or create an account.
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account