Sequential LED Taillight Kit Ultra Bright 1969

CJ's Part Number:
TLLED30
Sequential LED Taillight Kit Ultra Bright 1969 is rated 4.0 out of 5 by 4.
  • y_2019, m_10, d_21, h_7
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.13
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_4
  • loc_en_US, sid_TLLED30, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getAggregateRating, 34.45ms
  • REVIEWS, PRODUCT

Highlights

  • Detailed Instruction
  • Direct-Fit
  • Sequential Taillights
  • No Additional Wiring
MSRP $188.99
$169.99
You save 10%

Ultra Bright Sequential LED Taillight Kit for 1969 Mustangs.

Upgrade the look and brightness of your 1969 Mustang's taillights with this kit featuring 230 total LEDs! Taillights will look up to five times brighter than stock lights and feature a click flasher. Also, they don't sequence during braking thanks to patented "Smart Signal" technology. White board design creates greater reflectivity and light output that none can match!

Original lenses can be used since these taillights run cooler than the standard incandescent bulbs. Installation is a snap requiring NO additional wires or modifying.

Includes:
-Two taillight modules (115 LEDs per side)
-One flasher module
-Complete illustrated instructions

*Does NOT include taillight bezels, lenses or bodies.

Installation Videos

Vehicle Fitment

This product will fit the following Mustang years:

  • 1969
Rated 3 out of 5 by from Good and Bad! Let me start with the good. Shipping to Australia was fast. Brightness is excellent. Sequential flashing is a perfect speed. Now the Bad. Spacers supplied are not long enough if you have flush bulb socket. I spent hours engineering a bracket to space LED out. The globes are only held on by one tiny bolt with a standard nut. No nyloc! They will shake loose in no time and then twist and hit housing voiding warranty. Very Poor! I put loctite on everything plus glued foam to housing so circuit board can not hit the housing. I asked 2 questions about this product on CJ's ask a question and they never answered either of them.
Date published: 2018-01-26
Rated 4 out of 5 by from Very good brightness ! But deplorable mounting , I added screws for strength , really expensive for this quality , but I recommend this product...
Date published: 2019-03-28
Rated 5 out of 5 by from Very bright Stock lights were boring. These led will get noticed. Very bright stop and turn signal
Date published: 2016-05-20
Rated 4 out of 5 by from Easy install!!! My 16 year old son installed the lights and flasher in less than an hour!!!
Date published: 2017-04-02
  • y_2019, m_10, d_21, h_7
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.13
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_4
  • loc_en_US, sid_TLLED30, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getReviews, 3.85ms
  • REVIEWS, PRODUCT

is there a switch that can be mounted to this module that I bought so I can turn the sequential system on and off. Thankyou

Asked by: Fords for ever
you can always leave the original flasher in as well and use a 4 pole double throw toggle switch to switch which flasher gets power and also being able to keep the output power separated from each flasher.
Answered by: Siddin
Date published: 2018-10-02

I installed the kit to my 1969 Mustang. While testing, the turn signal is solid 3 stripes not sequencial. Did I do something wrong or is there a switch that you can change the sequences?

Asked by: Dejavu
Double check the wiring and that the flasher is installed correctly, try the emergency flashers, if they sequence than the flasher is in the wrong location.
Answered by: rk cjpp
Date published: 2016-08-05

Do you sell just the flasher unit?

Asked by: dave64 mustang
No, we only sell the complete kits. We offer this LED kit and this: http://www.cjponyparts.com/scott-drake-sequential-tail-light-kit-1969/p/STL4/
Answered by: CJPP Dave
Date published: 2015-10-16

can you use this sequential led light kit with oem taillight lens' or do you have to replace the original lens to go with this kit?

Asked by: tommy2tone69
No, you can use the original lenses without issue.
Answered by: CJ Pony Parts
Date published: 2015-08-18
  • y_2019, m_10, d_21, h_7CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.13
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_4
  • loc_en_US, sid_TLLED30, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getContent, 28.97ms
  • QUESTIONS, PRODUCT