Shelby Performance Parts LED Fog Light / Marker Light Kit V6/EcoBoost/GT 2015-2017

CJ's Part Number:
FGLA68
Rating:
96% of 100
MSRP $250.99
$239.99
You save $11.00

Shelby Performance Parts LED Fog Light and Marker Light Kit for all 2015, 2016 and 2017 North American-Spec EcoBoost and GT Mustangs and 2016-2017 V6 Mustangs optioned with Equipment Group 051A.

If you are looking for a way to truly make the front end of your North American-Spec 2015-2017 EcoBoost or GT Mustang or 2016-2017 V6 Mustang optioned with Equipment Group 051A stand out from the crowd, look no further than this LED Fog Light and Marker Light Kit from Shelby Performance Parts!

Originally Designed for use in the Shelby Super Snake Program, these are direct replacements for the factory marker light housings and feature DOT/SAE compliant fog lamps, turn signals and sidemarker functions. The inner side LED optic produces a wide, bright fog light pattern and the outer side reflectors illuminate amber for turn signals and sidemarkers. Chrome inner bezels provide factory-grade appearance and the wiring provides a direct connection to the factory electrical harness with no modifications making these a perfect solution for owners using brake duct cooling kits that have eliminated their factory fog lights. As a bonus, we include an exclusive auxiliary harness that is manufactured in the USA by Starkey Products and features OEM-style connections for unique dual fog light capabilities!

Features:
- Direct Replacements for the Factory Marker Light Housings
- DOT/SAE Compliant Fog Lamp, Turn Signal and Sidemarker Functions
- Inner Side LED Optic Produces a Wide, Bright Fog Light Pattern
- Outer Side Reflectors Illuminate Amber for Turn Signal and Sidemarker
- Chrome Inner Bezel Provides Factory-Grade Appearance
- Direct Connection to Factory Electrical Harness with No Modifications
- Includes Auxiliary Harness with OEM-Style Connections for Unique Dual Fog Light Capabilities
- Originally Designed for use in the Shelby Super Snake Program
- Perfect Solution for Owners Using Brake Duct Cooling Kits that have Eliminated their Factory Fog Lights

Please Note: This kit does NOT include any additional wiring and/or switches that would be necessary to upgrade a 2015 V6, 2016-2017 Base Model V6, GT350 and GT350R models that were not originally equipped with Fog Lights from the factory.

*Will NOT fit models that are manufactured for distribution outside of North America due to differences in the factory wiring.

Tech Tip: This is Shelby Performance Parts LED Fog Light and Marker Light Kit is NOT compatible with the Diode Dynamics LED Switchback Turn Signal Bulb and Cool White Side Marker Kit. This kit is also NOT compatible with the Anderson Composites Fiberglass Type-TT Front Bumper (P/N: BCF41).

Carroll Shelby is a name that’s well known by every Mustang enthusiast. CJ Pony Parts is proud to offer a wide selection of Shelby parts that will enhance the look of the interior and exterior of your pony car. Shelby Performance Parts is an officially licensed retailer of Mustang Shelby parts and all parts are designed and built to live up to the high standards for quality, performance and style first established by Carroll Shelby nearly 50 years ago.

Order this Shelby Performance Parts LED Fog Light and Marker Light Kit for your North American-Spec 2015, 2016 or 2017 EcoBoost or GT Mustang or 2016-2017 V6 Mustang optioned with Equipment Group 051A from CJ Pony Parts today!

California Residents: Proposition 65 Warning

Installation Difficulty

Easy
Easy

Novice skill is required for this installation.

Installation Videos

Video Transcript

Today we're going to show you how to add a little bit of 2018 styling in the front of your 2015 through 2017 Mustang with help from Shelby Performance Parts.

These custom marker light/fog light combos from Shelby Performance Parts will be direct replacement for the factor marker lights on all 2015 through 2017 Mustang. They feature an LED marker and a custom, front-mounted fog light, very similar to the style that's on the 2018 Mustang. These can be used with the factory fog lights on your 2015 through 2017 with the provided harnesses, but are also excellent for replacing your fog lights if you install brake ducts or custom front fascia. For this installation you need a 1/4 inch ratchet, 7 millimeter socket, and a clip removal tool.

Now to install the new marker lights, what we have to do is remove the splash shield to get to the light itself. You do not have to remove the bumper. You actually don't even have to get the car up in the air, like we did, or take the wheel and the tire off. If you turn it all the way, you can sneak in here. We removed the wheel though, put it up in the air, to make it easier to see what we're doing.

To remove the splash shield, we have to remove the mounting clips, and there's going to be three up top here, and then two underneath. Okay with the clips out, now we can remove the splash shield. Simple push it back out of the way. Okay, here you can see the marker light assembly. We're going to remove the entire housing, so you'll want to disconnect all the harnesses first, get the wiring harness out of the way. Now to remove the housing, there's going to be six bolts, two back here, one there, one here, and then two more in the front. With all the screws out, it's only held in place by some clips, just give it a good push and it will come out.

Okay, now with the assembly out of the car and on the table, we're going to remove the marker light. To do that, remove these three screws. Out of the old marker light, we're going to remove this here, and remove the bulb. Install this in the new marker light, basically just to seal it. All right, now I can put this in place in the housing, and attach using the factory hardware. It's ready to go back on the car.

If you're continuing to run the factory fog light, at this point you want to grab the harness, you're going to plug in the new fog light, and also plug into the original, and this will go to the factory plug. Now you can put the original housing with the new marker light back into place, line it up with the clips, and slide it on. Now we're going to plug everything in, and before we put it back together, we'll quickly test it.

If you have the key fob, hit the lock button. If you don't, simply just open the door and the marker lights will turn on. Okay, with everything tested, now we can reinstall the original hardware. Now put the splash shield back into place, and install all the clips. Then repeat the process on the other side and your installation's finished.

First we'll show them as a marker light, and now we'll show you with the fogs turned on. Like you see here, they can be used in conjunction with the original lights, or if again, you delete original lights for whatever reason, a custom bumper or for brake duct work, these will work by themselves.

The combination fog and marker light kit from Shelby Performance Parts will definitely give a little bit of a 2018 style to the front of any 2015 through 2017 Mustang. As you can see, they are direct replacement for the factory marker lights, and look great on the front of the car, and can be used by themselves or with the factory fogs. Installation is pretty straightforward. It should take no more than about an hour. You'll be back on the road in no time.

Vehicle Fitment

This product will fit the following Mustang years:

Only registered users can ask/answer questions. Please sign in or create an account.
Write Your Own Review
Only registered users can write reviews. Please sign in or create an account.
Complete Your Package
Add to Cart