Specialty Products Company Camber/Caster Sleeve 0-Degree 4WD F-250/F-350 1999-2018
Specialty Products Company 0-Degree Camber and Caster Sleeve for 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017 and 2018 4WD F-250s and F-350s.
Looking for a way to change camber, caster or both at the same time on your 1999-2018 Super Duty F-250 or F-350 in less than an hour? Then be sure to pick up this Specialty Products Company 0-Degree Camber and Caster Sleeve from CJ Pony Parts!
Features & Benefits:
- Needed to Determine Correct Caster/Camber Degree
- Change Camber, Caster or Both at the Same Time
- Remove Tire, Cotter Pin and Upper Ball Joint Stud Nut and Break Taper Free between Stud and Sleeve
- Use a Sleeve Puller, Remove Existing Sleeve and Install this Sleeve to Determine Change Needed, Then Install Correct Sleeve
- To Adjust: Sleeve May be Lifted and Rotated 1/8-Turn
- Installation Time: 1/2-Hour Per Side
- Sold Individually: One Required Per Wheel
This Specialty Products Company (23139) 0-Degree Camber and Caster Sleeve allows you to change camber, caster or both at the same time. Simply remove the tire, cotter pin and upper ball joint stud nut and break the taper free between the stud and the sleeve. Using a sleeve puller, remove the existing sleeve and install this sleeve to determine the change needed. Then install the correct sleeve. This camber and caster sleeve is sold individually, and you will need one per wheel.
Order a Specialty Products Company (23139) 0-Degree Camber and Caster Sleeve for your 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017 or 2018 4WD F-250 or F-350 from CJ Pony Parts today!
California Residents: Proposition 65 Warning