Steeda Lowering Spring Set Focus ST 07/08/2013-2018

Replace the uninspiring factory suspension springs on your 2013.5-2018 Focus ST with this Lowering Spring Set from Steeda. These lowering springs were precision-designed to improve traction, lessen built-in understeer and enhance cornering capabilities in your Focus ST.

Features & Benefits:
- Spring kit will fit 2013-2018 Focus STs built after July 8^th, 2013
- Drops the front by 1.0”
- Drops the rear by 1.4”
- CNC wound with high tensile strength chrome-silicon spring wire
- Reduced body roll
- Less nose dive
- Minimizes wheel hop
- Increases traction
- Considerably reduces understeer
- Overall improved handling
- Made in the USA

Steeda Focus ST Lowering Springs are CNC wound with high tensile strength chrome-silicon spring wire. These springs go through a heat treatment, are shot peened, then re-heat treated and finally powder-coated to ensure corrosion resistance and no spring sag over the course of their service life. With these springs, your Focus will be lowered 1” in the front and 1.4” in the rear which will lower the center of gravity, as well as give your hatchback a cool, sleeker appearance.

Like most front wheel drive cars, the Focus ST is susceptible to severe understeer when pushed to the limit. Steeda’s lowering springs provide front to rear balance by increasing the rear spring rate proportionally more than they increase the front spring rate. This will considerably reduce the understeer while still being conservative enough to produce mild understeer so that the car is easy to drive.

Please Note: This spring kit fits 2013-2018 Focus STs that are built after July 8th, 2013.

Order a Steeda Lowering Spring Set for your 2013.5, 2014, 2015, 2016, 2017 or 2018 Focus ST from CJ Pony Parts today!