STO N SHO License Plate Bracket Quick-Release Front For Winch Mounted Roller Fairleads

CJ's Part Number:


  • Detachable Front Plate Bracket
  • Premium 5052 & 6061 Aluminum
  • Easy Installation
  • Made In The USA
MSRP $97.99
You save $5.00

STO N SHO Quick-Release Front Front License Plate Bracket for Winch Mounted Roller Fairleads.

If you need a front license plate on your vehicle to keep street-legal but don't know where to mount it around your front winch, then you'll definitely want to order this STO N SHO Quick-Release Front Front License Plate Bracket now from CJ Pony Parts!

Features and Benefits:
- Designed specifically for vehicles equipped with winch-mounted roller fairleads
- After-market bracket allows front-facing license plates
- Two-piece, detachable mounting system for front-facing plates
- Constructed of premium-quality 5052 and 6061 aluminum
- Finished with high-quality black automotive paint
- Product is tested and hand-cleaned to ensure optimum operation
- Does not require any permanent modifications
- Made here in the U.S.A.

It can be hard finding the middle ground between awesome exterior upgrades and staying street-legal, but that's exactly what you can do with this brand-new front license plate bracket! The STO N SHO bracket will make it easy to go from road to show or trail, letting you quickly pop-off your license plate and instead use your winch whenever you might need. This premium-quality bracket is constructed from aluminum with a durable black finish for rugged durability no matter where you're driving. The two-piece design allows you to mount the bracket and simply install or remove the front license plate with the simple pull of a pin.

California Residents: Proposition 65 Warning

Installation Videos

Video Transcript

Today on CJ Off Road, we're going to show you how to mount a license plate onto the front of your winch bumper. If you're looking to install a front license plate onto your off road vehicle, then today we're going to be installing this Stow and Show front license plate bracket fitting your off road vehicle equipped with a Roller Fairlead.

This Stow and Show front license plate bracket features an aluminum construction with a durable black powder coat. It includes all the nuts and bolts to get your license plate mounted on the front. And it's simply slides behind your Roller Fairlead bracket. This is a great option if your state requires a front license plate, or if you're looking to add a vanity plate to your off road vehicle.

With that being said, we're going to get it installed on our 2012 Jeep Wrangler. We're at the front of our JK, and the first step that I'm going to do, is loosen out Fairlead bolt, slide the bracket behind there, and get started. We're going to loosen up the Fairlead mounting bolt. Every Fairlead is going to be a little bit different, so you'll just have to find out which yours takes. It's only a nut and a bolt. And if you already previously installed it, you'll probably know what it is, or have a round-about guess.

Let's get it loosened up, that way we can slip that bracket behind there. Repeat the same process on the other side. Just get it nice and loosened up, that way you can slip the bracket behind there. Once you have the Fairlead bolts loosened up, one of the nicest features about this bracket, is that is won't interfere with your light bar. You push it up through the bottom, just right under where the Fairlead would be. It'll slide up to where your bolts go. And you can tighten the bolts back down, and then we'll put the license plate bracket it.

Once you have the Fairlead bolted back into place, simply pull the release tab, slide your bracket in. You'll hear a click, and you can bolt your license plate to it. We're going to use the provided hardware to get our vanity plate. As you can see it's a CJ Plate, if you have the front license plate, or anything like that for your state, you can mount it up with the provided hardware. Just a Phillips head screw in the front, and a 10 millimeter on the back.

Once you have your license plate fastened on, your installation's complete. We just finished up the install of this Stow and Show front license plate bracket fitting the Roller Fairlead. This bracket is really awesome. It only took me about 20 minutes to install, and the best part is, you can pull it off with one pull pin. Now you have access to the winch, and you can throw your license plate in the back of your off road rig.

Now you can find this license plate bracket, as well as many other great parts for your off road rig right here at

Vehicle Fitment

This product will fit the following Bronco years:

This product will fit the following F-150 years:

Only registered users can ask/answer questions. Please sign in or create an account.
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account