STO N SHO License Plate Bracket Quick-Release Front Mustang With Performance Package 2018-2022

91% of 100


  • 2-Piece Detachable System
  • 5052 And 6061 Aluminum
  • Easy Pop-Off Feature
  • Made In The USA
MSRP $97.99
You save $5.00

STO N SHO Quick-Release Front License Plate Bracket for 2018, 2019, 2020, 2021 and 2022 Mustangs with the Performance Package.

If your state requires you to have a front-mounted license plate, but you don’t want to ruin the front bumper of your 2018-2022 Mustang, then you need to check out this STO N SHO Quick-Release Front License Plate Bracket (SNS135A) from CJ Pony Parts! This bracket allows you to have a front-mounted license plate without having to drill unsightly holes into your Mustang's front bumper.

Features and Benefits:
- Two-Piece Detachable Mounting System
- Constructed From 5052 and 6061 Aluminum
- Finished with Stealthy Black Paint
- Precision Laser Cut and Hand Burnished
- Long-Lasting, High-Quality Design
- Easy Pop-Off Feature for Car Shows/Racing
- Made in the USA

This STO N SHO Quick-Release Front License Plate Bracket is an aftermarket solution to the front-mounted license plate that will not ruin your front bumper. It is a two-piece quick release system consisting of a front license plate holder and a base mounting plate that allows you to stay legal while on the streets but can be simply removed when you are at a car show or track.

Once the front plate is removed you can’t even tell the mounting plate is there! Manufactured in the USA, the STO N SHO system is constructed from 5052 and 6061 aluminum for a durable construction.

Both of the plates are precision laser cut and hand-burnished while each tube and rod is machine cut and hand cleaned. The entire bracket system is then finished with a sleek black paint for a nice finished look.

Tech Tips:
- Will require one hole to be drilled for installation.
This License Plate Bracket will also fit the 2019-2020 Bullitt and 2018+ California Special models.

Please Note: Designed for use with models equipped with the Performance Pack; for models NOT equipped with the Performance Pack see P/N: LPB53.

California Residents: Proposition 65 Warning

Related Categories: Mustang Parts, Mustang Body & Sheet Metal, Mustang License Plate Brackets, Mustang Exterior Accessories

Installation Videos

Video Transcript

If you have brand new 2018 Mustang with the performance pack and live in a state that requires a license plate, today we're going to show you how to install one without drilling holes in your new bumper.

The STO N SHO bracket is available for performance pack and non-performance pack Mustangs. The installation's very simple. This bracket is going to install underneath your bumper on this plastic valance down here and this will simply slide on and lock into place.

For this installation we need a T-15 Torx bit, seven millimeter socket or nut driver and a 10 millimeter socket or nut driver.

The first thing you want to do is remove this screw from the center of your factory lower trim. The bolt removed we can install the bracket. You want to make sure the release is facing the driver side. Grab the provided screw, put it through the front, put the spacer on then install the screw right where the screw came out that we just removed. With that screw in the front the kit includes this self-tapping screw as well. Grab a 10 millimeter socket or a nut driver, force it into the plastic. And get it snug, you don't have to over tighten it. Install the plate and provided hardware, pull back on the pin, lock it in and your installation's finished.

The STO N SHO bracket's a great way to add a necessary license plate to the front of your Mustang without drilling holes. The best part about it, you're going to a track or car show, whatever, pull the pin, take it off, throw it in the trunk and you can put right back in place for the ride home to keep you legal. Just line it up, pull the pin and lock it in place. Installation's very simple. You actually don't need the car up in the air, you can do it on the ground. Take you no more than about 15 minutes, back on the road in no time.

Vehicle Fitment

This product will fit the following Mustang years:

Only registered users can ask/answer questions. Please sign in or create an account.
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account
Complete Your Package
Add to Cart