STO N SHO License Plate Bracket Quick-Release Front Mustang Without Performance Package 2018-2022

94% of 100


  • 2-Piece Detachable System
  • 5052 And 6061 Aluminum
  • Easy Pop-Off Feature
  • Made In The USA
MSRP $97.99
You save 8%

STO N SHO Quick-Release Front License Plate Bracket for 2018, 2019, 2020, 2021 and 2022 Mustangs without the Performance Package.

Does your state require you to have a front-mounted license plate? Then you need this STO N SHO Quick-Release Front License Plate Bracket (SNS135) from CJ Pony Parts! This bracket allows you to have a front-mounted license plate without having to drill unsightly holes into your 2018-2022 Mustang's front bumper.

Features and Benefits:
- Two-Piece Detachable Mounting System
- Constructed From 5052 and 6061 Aluminum
- Finished with Stealthy Black Paint
- Precision Laser Cut and Hand Burnished
- Long-Lasting, High-Quality Design
- Easy Pop-Off Feature for Car Shows/Racing
- Made in the USA

This STO N SHO Quick-Release Front License Plate Bracket is an aftermarket solution to the front mounted license plate that will not ruin your front bumper. It is a two piece quick release system consisting of a front license plate holder and a base mounting plate that allows you to stay legal while on the streets but can be simply removed when you are at a car show or track.

Once the front plate is removed you can’t even tell the mounting plate is there! Manufactured in the USA, the STO N SHO system is constructed from 5052 and 6061 aluminum for a durable construction. Both of the plates are precision laser cut and hand-burnished while each tube and rod is machine cut and hand cleaned.

The entire bracket system is then finished with a sleek black paint for a nice finished look.

Please Note: Designed for use with models NOT equipped with the Performance Pack. For Performance Pack, California Special and Bullitt models, see P/N: LPB54.

Tech Tip: Will require one hole to be drilled for installation.

California Residents: Proposition 65 Warning

Installation Videos

Video Transcript

If you live in a state that requires a front license plate today I'm going to show you how to install one on your brand new 2018 Mustang without drilling holes in the bumper. This is the stow and show bracket that will allow you to mount the license plate underneath of your front bumper by drilling one simple hole in your valance. The best part about it is, it is removable. Simply pull this pin when it's installed in the vehicle, take the plate off, you're at a car show, race, whatever, and just throw the plate in the trunk.

And to be legal for the ride home slide that in, put the plate back on. This stow and show bracket shown here will fit your nonperformance pack 2018 Mustang, but a performance pack version is also here at For this installation you need a Phillips-head screwdriver, T15 TORX bit, 1/4 inch ratchet, 7 millimeter socket and a 10 millimeter socket.

The first step of the installation is you're going to remove this center screw here from the factory lower splash pin. Now, we have the car up in the car just so you can see what we're doing. This whole installation can actually be done on the ground. With the factory screw removed we're ready to install our stow and show bracket. Now, you want to make sure when you do this the ring is facing the driver's side. The smaller hole in the front, that's where we're actually going to put the hardware for the screw we just removed.

What we're going to do it put the screw in from the bottom, take the provided spacer and put that on top. Then we can screw it into the valance. Now, get this snug, and then you want to make sure you have it straight. This part you can use a drill. It'll be easier if you have it. But all you got to do, this is basically a self-tapping screw. Put that in the larger hole back here and just thread it in. Now, using the supplied hardware you can screw your plate onto the bracket. Just line it up. Pull the pin. It locks in place and your installation's finished.

If your state requires a front plate the STO N SHO is definitely the way to do it on a 2018 Mustang. It simply clips in place. When you go to the race track or a car show simply pull it and put it aside. It'll look a lot better, and then when time to go home simply line it up, slide it back in, locks in place to keep you legal.

Vehicle Fitment

This product will fit the following Mustang years:

Only registered users can ask/answer questions. Please sign in or create an account.
Write Your Own Review
Only registered users can write reviews. Please sign in or create an account.
Complete Your Package
Add to Cart