TMI Seat Foam Premium Mach 1/Shelby 1969-1970
CJ's Part Number:
SF34-V
Only %1 left
Product Description
TMI Premium Seat Foam for 1969 and 1970 Mach 1 and Shelby Mustangs with High Back Seats.
TMI's Premium Seat Foam is constructed to provide a painless installation. Listing wires are molded right into the TMI seat foam unlike the factory foam. This makes installing seat upholstery much easier as there is no fussing with loose listing wires. The seat foam is made to be used with original style upholstery in 1969 and 1970 Mach 1s and Shelby Mustangs with high back seats.
TMI's seat foam lets you reuse your stock seat frames and avoid fully replacing the entire seat. This allows for great, comfortable new seat foam to fit and be installed rather painlessly.
Features and Benefits:
- For use with original style seat upholstery
- More comfortable than stock seat foam
- Uses stock seat frame
- Molded listing wires
This TMI seat foam works with TMI's original style seat upholstery to provide gorgeous, cozy seating. The TMI seat foam is easy to install, with molded-in listing wires for easy covering which helps maintain the proper shape. This foam includes a back section and a bottom section of seat foam, enough to do just one seat at a time. Pick up this TMI seat foam and start feeling absolute luxury and comfort from the moment you sit down in your 1969 or 1970 Mach 1/Shelby Mustang.
Available for a single seat or in a pair for both front bucket seats.
Please Note: This seat foam will only fit the high back bucket seats in 1969 and 1970 Mach 1s and Shelby Mustangs. This seat foam does not fit other versions of 1969 and 1970 Mustangs with low back bucket seats.
*Fits original high back style upholstery only. Not for use with TMI Sport upholstery.
*Will not fit 1969-1970 Standard and Deluxe seats.
Purchase your TMI Premium Seat Foam for all 1969 Mach 1s and 1970 Mustangs with High Back Seats from CJ Pony Parts today!
TMI's seat foam lets you reuse your stock seat frames and avoid fully replacing the entire seat. This allows for great, comfortable new seat foam to fit and be installed rather painlessly.
Features and Benefits:
- For use with original style seat upholstery
- More comfortable than stock seat foam
- Uses stock seat frame
- Molded listing wires
This TMI seat foam works with TMI's original style seat upholstery to provide gorgeous, cozy seating. The TMI seat foam is easy to install, with molded-in listing wires for easy covering which helps maintain the proper shape. This foam includes a back section and a bottom section of seat foam, enough to do just one seat at a time. Pick up this TMI seat foam and start feeling absolute luxury and comfort from the moment you sit down in your 1969 or 1970 Mach 1/Shelby Mustang.
Available for a single seat or in a pair for both front bucket seats.
Please Note: This seat foam will only fit the high back bucket seats in 1969 and 1970 Mach 1s and Shelby Mustangs. This seat foam does not fit other versions of 1969 and 1970 Mustangs with low back bucket seats.
*Fits original high back style upholstery only. Not for use with TMI Sport upholstery.
*Will not fit 1969-1970 Standard and Deluxe seats.
Purchase your TMI Premium Seat Foam for all 1969 Mach 1s and 1970 Mustangs with High Back Seats from CJ Pony Parts today!
Related Categories: Mustang Parts, Mustang Interior, Mustang Seats, Mustang Upholstery, Mustang Seat Foam
Installation & Fitment
Installation Videos
Video Transcript
Bill: Today, we are taking a look at some ways to upgrade your Mustang's interior using premium products from one of our more popular vendors, TMI. TMI has been an industry leader for over 30 years, producing interior products for your '64 through 2013 Mustang. Today, we have a special guest in our studio, TMI sales manager Waylon Crumrie. Waylon, thanks for coming.
Waylon: Thanks for having me Bill.
Bill: I'm sure that you get this a lot, but what does TMI stand for?
Waylon: TMI was founded in 1982 by four brothers whose last name is Tuccinardi. You get Tuccinardi Manufacturing Incorporated.
Bill: How did you get in to the Mustang market?
Waylon: Originally we started doing Volkswagen interiors, but we quickly saw the market demand for high-quality premium Mustang upholstery and so we have been doing that now for about 25 years.
Bill: Where do you manufacture your products?
Waylon: We manufacture in Corona, California, where we have about 140,000 square feet and nearly 200 employees who do 100% of our manufacturing right here in the U.S.A.
Bill: I hear that you have some new products for us today?
Waylon: I sure do. Do you want to take a look?
Bill: Sounds good. Waylon, a lot of our customers do not know a lot about seat foam and I hate to admit it, but I do not know much about it myself. What makes your premium different than your standard seat foam?
Waylon: That is a good question and I am happy to clarify, because we do get that question a lot. You know, on the surface these two foams appear almost identical. They are both '64 to '66, close cell high-density foam but the difference between our standard foam and our premium is when you get a little closer. Originally, foams were designed like this. Just an empty channel where you would hog ring through and the frustration would be is that you would blindly have to poke through this with your hog ring and find an attachment point on the back. What we have done, in order to save frustration, especially for the first time installer, if this is your first install on upholstery, this will definitely save you some time and again the frustration of blindly trying to find an attachment point.
We actually molded the listing channel directly in to the foam so that you can visually see it without having to, like I said, blindly search through the back of the foam, hoping to find the right place to attach. One more thing that I would like to point out that we do in order to ease the installation for the first time installer and actually the experienced installer is that normally you would have to lay down burlap in between the foam and the springs to help protect the foam from being punctured by the springs. Both of our standard and our premium foams come with a protective layer already adhered to the back of the foam. Again, this is so you don't have to use burlap in addition to this and it will suffice in keeping your foam safe from punctures from the springs.
Bill: Waylon, what model of Mustang do you offer foam for?
Waylon: We offer our standard and premium line for the '64 to '73 Mustang and then we pick it up again and do it from '79 to 2007 and that is including the special edition Mustang's like the Cobra, Bullitt, and Mach 1.
Waylon: Thanks for having me Bill.
Bill: I'm sure that you get this a lot, but what does TMI stand for?
Waylon: TMI was founded in 1982 by four brothers whose last name is Tuccinardi. You get Tuccinardi Manufacturing Incorporated.
Bill: How did you get in to the Mustang market?
Waylon: Originally we started doing Volkswagen interiors, but we quickly saw the market demand for high-quality premium Mustang upholstery and so we have been doing that now for about 25 years.
Bill: Where do you manufacture your products?
Waylon: We manufacture in Corona, California, where we have about 140,000 square feet and nearly 200 employees who do 100% of our manufacturing right here in the U.S.A.
Bill: I hear that you have some new products for us today?
Waylon: I sure do. Do you want to take a look?
Bill: Sounds good. Waylon, a lot of our customers do not know a lot about seat foam and I hate to admit it, but I do not know much about it myself. What makes your premium different than your standard seat foam?
Waylon: That is a good question and I am happy to clarify, because we do get that question a lot. You know, on the surface these two foams appear almost identical. They are both '64 to '66, close cell high-density foam but the difference between our standard foam and our premium is when you get a little closer. Originally, foams were designed like this. Just an empty channel where you would hog ring through and the frustration would be is that you would blindly have to poke through this with your hog ring and find an attachment point on the back. What we have done, in order to save frustration, especially for the first time installer, if this is your first install on upholstery, this will definitely save you some time and again the frustration of blindly trying to find an attachment point.
We actually molded the listing channel directly in to the foam so that you can visually see it without having to, like I said, blindly search through the back of the foam, hoping to find the right place to attach. One more thing that I would like to point out that we do in order to ease the installation for the first time installer and actually the experienced installer is that normally you would have to lay down burlap in between the foam and the springs to help protect the foam from being punctured by the springs. Both of our standard and our premium foams come with a protective layer already adhered to the back of the foam. Again, this is so you don't have to use burlap in addition to this and it will suffice in keeping your foam safe from punctures from the springs.
Bill: Waylon, what model of Mustang do you offer foam for?
Waylon: We offer our standard and premium line for the '64 to '73 Mustang and then we pick it up again and do it from '79 to 2007 and that is including the special edition Mustang's like the Cobra, Bullitt, and Mach 1.
Questions & Answers
Reviews 2
Write Your Own Review
Complete Your Package