Total Control Products Manual Rack And Pinion Conversion System For 3/4" Steering Shaft 351C/390/427/428 1967
Total Control Products Manual Rack and Pinion Conversion System for 1967 Mustangs with a 3/4" Steering Shaft and a 351C, 390, 427 or 428 Engine.
Boost the performance of the steering on your classic 1967 Mustang with a 3/4" Steering Shaft and a 351C, 390, 427 or 428 Engine by applying this Total Control Products TCP RCKM213 Manual Rack and Pinion Conversion System to your upgraded pony. This system contains a manual rack and pinion unit, column steering shaft, universal joints and tie rod adapters. This high performance rack and pinion system maintains correct steering geometry while providing a positive, direct steering feel that OEM units simply cannot provide.
Features and Benefits:
- Works with 1967 Mustang with a 3/4" Steering Shaft and a 351C, 390, 427 or 428 Engine
- High performance rack and pinion
- Maintains correct steering geometry
- Provides positive direct steering feel
- Achieves a three turn lock-to-lock
- Quicker steering control and response
- Re-uses factory mounting position where possible
- Engine specific mounting brackets and centerlinks
- More support and strength
- Duplicates the factory travel
- Made in the USA
Duplicating the factory travel of 6-3/8”, Total Control Products rack and pinion system offers the most clearance for the installation of aftermarket headers and exhaust by keeping the steering shaft and universal joints as close to the frame rail as possible. Additionally, your new rack allows for exact duplication of stock inner tie rod positions to maintain correct steering geometry. By replacing the factory crossmember behind the oil pan, this Total Control Products rack and pinion maximizes ground clearance. Stronger in both compression and torsion, the steel tubing of the rack has a 20% larger diameter than the factory brace it will replace. Featuring a simple and efficient design, this TCP rack and pinion offers superior road feel and steering that stands alone. The main key to this superb steering feel is the use of straight-cut gears that drive the rack gear in the desired direction. To simplify what most would consider to be a difficult installation process, Total Control Products manual rack and pinion system reuses the factory mounting points wherever possible in addition to a mixture of engine specific mounting brackets and centerlinks to adapt to your classic Mustang.
- Manual Rack and Pinion Unit
- Column Steering Shaft
- Universal Joints
- Tie Rod Adapters
Please Note: Installation of the rack and pinion on 1967 Mustangs will require a 3/4” steering shaft.
Total Control is an industry leading manufacturer of safety and steering assembly equipment for a wide range of Mustang years and models. They supply Mustang owners with a variety of products, ranging from bumpsteer kits, shock tower braces and coilover packages, to engine mounts, subframe connectors, driveshaft safety loops and suspension kits.
Order this Total Control Products TCP RCKM213 Manual Rack and Pinion Conversion System for your 1967 Mustang with a 3/4" Steering Shaft and a 351C, 390, 427 or 428 Engine today from CJ Pony Parts.
California Residents: Proposition 65 Warning
Advanced skill is required for this installation.
This product will fit the following Mustang years: